The manure removal machine is often used in the sewage disposal work. The application of this equipment greatly reduces the manual investment, not only improves the working efficiency but also protects the staff, and avoids the danger of manual direct operation. When using a manure remover, there are the following issues that need attention, so as to ensure the smooth progress of the discharge.
First, pay attention to the power support of the equipment. The work of the manure extractor is achieved by the vacuum pump providing the pressure to discharge the internal air before it can suck the waste into the tank on the car. The work of the vacuum pump requires the engine to provide a certain amount of power. Usually, tricycles and automobiles can be used to provide power. However, depending on the size of the workload, the required power varies. If the workload is large, then it is difficult for the tricycle to provide sufficient power. It is recommended to connect an external motor, which can improve work efficiency. The use of cars can meet the basic needs of rural sewage, but if it is used for a long time, it is also a kind of loss for the car. Therefore, it is recommended to use a separate motor for the vacuum pump to ensure smooth operation of the sewage.
Second, pay attention to the correct operation when using. Before working, the manure extraction machine should be connected with related equipment, such as the connection of vacuum pump and various pipelines. It is also necessary to pay attention to checking whether there are cracks in the pipeline. If there are loopholes, then it will have a greater impact on the sewage disposal work. When installing the vacuum pump, pay attention to its height setting. Only when the height is moderate can the air in the tank be discharged efficiently, and then the waste can be sucked into the tank to complete the operation.
Third, pay attention to the daily maintenance and maintenance of the equipment. The core of the maintenance of the pumping manipulator is the inspection and maintenance of the vacuum pump. If the pump is used, it is necessary to prevent the engine oil from condensation in winter and add antifreeze in time. The other is to check the connected pipes daily to prevent breaks. The use of the manure machine should also pay attention to the frequency of control use, such as the device will heat up after a period of continuous work, it should be suspended for a long time in the heating state for the device will cause greater wear and tear.
Rock Drill is a tool used to directly extract stone. It drilled holes in the rock so that explosives could be used to break up the rock, allowing it to complete quarrying and other quarries. In addition, the rock drill can also be used as a breaker to break hard layers such as concrete. According to its power source, the rock drill can be divided into four parts: Pneumatic Rock Drill, internal combustion rock drill, electric rock drill and hydraulic rock drill
Rock Drill
Rock Drill,Rock Drilling Equipment,Air Rock Drilling,Manual Rock Drill
Jining Dongda Electromechanical Co.,Ltd. , https://www.coal-mine-equipment.com