The Inner Mongolia Autonomous Region Administration for Industry and Commerce recently announced the results of the quality inspection of LED lights in the circulation field in 2016. The quality of 30 kinds of LED lamps has quality problems, mainly due to the fact that the lamp power and harmonics do not meet the relevant standards. The unqualified products announced this time include the following trademarks: Saiwo (1 batch), Baishirui (1 batch), Lianghua Optoelectronics (1 batch), Mulinsen Lighting (1 batch), and light movement. Shadow (1 batch), Xiangtian (1 batch), red house (3 batches), small ghost (2 batches), advantage lighting (1 batch), Taixiang (1 batch), Suo Zheng ( 1 batch), Jade Dragon (1 batch), Dove (1 batch), Shijia (1 batch), Yanke Lighting (1 batch), Harmony Lighting (1 batch), Sanjin (1 batch), Frant (1 batch), financial lighting (1 batch), Mingmo (1 batch), Merida Lighting (1 batch), Ang (1 batch), Kyrgyzstan Shun Lighting (1 batch), Chaoyu Lighting (1 batch), Guangrui Lighting (2 batches), DJH (1 batch). For the unqualified goods found in the spot check, the administrative department for industry and commerce has ordered to stop the sale and imposed penalties in accordance with relevant laws and regulations. Any unqualified commodity producers and related dealers shall, in accordance with the requirements of relevant laws and regulations, take the initiative to take measures such as recall, removal, and delisting. If no relevant measures are taken, the industry and commerce department will be in accordance with the Law on the Protection of Consumer Rights and Interests. The provisions of the regulations are investigated and dealt with. The administrative department for industry and commerce reminds consumers that when purchasing lamps, they should pay attention to the selection of famous brand products produced by well-known enterprises; the product logo should be checked when purchasing, the specifications, models and trademarks of the products should be consistent with the instructions, and the product manual or nameplate should have The national compulsory certification mark (namely CCC mark), the name of the manufacturer, the factory inspection certificate, and the execution standard code. Don't stray into low-cost traps when buying lamps, and avoid situations where product quality cannot be guaranteed. Inner Mongolia Autonomous Region Industry and Commerce Bureau 2016 list of unqualified products for quality inspection of LED lights in circulation
Environmentally Friendly Polyolefin Heat Shrink Tubing
Product description:
Environmentally friendly polyolefin heat shrink tubing is made of polyolefin material, Thin wall cable protection heat shrink tubing it has the function of insulation and protection.Flexible thin wall polyethylene heat shrink tubing it applies to electric components, coating of the wire harness, and protection of the terminal junction of the electric wire and cable, at the same time, thin wall heat shrink tubing it also has the function of color identification. It's widely used in electrics, electronic industry, electrical industry, etc.
Feature and benefit:
Our Shrink Tubing feature and benefit :Shrink ratio is 2/1 with flexible, low shrink temperature,excellent physical and electrical performance.
Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.
Our Thin Wall Shrink Tubing Feature and Benefit:
Shrink ratio is 2/1 with flexible, low shrink temperature,excellent physical and electrical performance.
Up to standard: Approvals
Meet UL224 125 degrees Celsius 600V VW-1
Operating Temperature Range:
a) Operating temperature range: -55 ~ 105 degrees Celsius
b) Minimum shrink temperature: 60 degrees Celsius
c) Minimum full recovery temperature: 100 degrees Celsius
Ordering Information:
Color:Standard: Shiny black, clear, white, red, blue , yellow, green
Nonstandard: Brown, orange, violet, gray
Nonstandard size:Special sizes are available upon request.
Standard packaging:On spools. Cut pieces are available upon request.
Ordering description:Specify product type, size (mm or inch) and color.
Product picture:
Avg. Wall thickness = (max. Wall thickness = min.Wall thickness)
Thin Wall Heat Shrink Tubing
Thin Wall Heat Shrink Tubing,Ultra Thin Wall Heat Shrink Tubing,Thin Heat Resistant Shrink Tubing,Thin Wall Polyolefin Heat Shrink Tubing,Waterproof Heat Shrink Tubing,Heat Shrinking Thin Wall Tubing
KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com