Everyone knows that vehicle handling after heavy rain is troublesome. As the owner of the stage vehicle, we must do a good job of checking and maintaining the vehicle in a timely manner. Cleaning the vehicle not only makes it beautiful and clean, but also reduces the corrosiveness of the rain to the paint. A stage car owner with many years of experience reminds us that we must be prepared before we go on a rainy day. Under the water's surface and under the bridge, if it is necessary to get through the water surface, we must check the height of the water ahead of time. Do not be impulsive and safety first.
After a heavy rain, the surface damage to the stage car is very large. The reason is that there is a lot of dirt in the rain, it is also mixed with some sand and there are more acidic substances. If these substances are on the surface of the car for a long time, The life expectancy has a great influence. Therefore, it is recommended that all the owners of our vehicle should be cleaned promptly after the rainy weather. Once there is a small amount of wear, the vehicle paint will be cured in time.
Rainy days also hurt the flow stage car brake discs. The reason is the same. The brake discs are made of iron material. Therefore, the brake discs that are affected by the rain will rust. However, there is one point we need to pay attention to. When we drive on the road after a rainy day, if the brake disc rusts, don't be anxious. First drive the car out, and then step on the road and step on the brakes. After a few more steps, its rust will be removed. Our driving will also be safe. If the rust has encountered a sudden brake when it has not worn down, its distance will also be affected.
The second is to look at the light of the stage cars after the rainy day. Generally, the light quality is not very good and it is particularly easy to enter the water. Inflow will directly cause its brightness to change, the greatest degree of damage to the lights is the way. It also changes the direction in which the lamp shines. Give us a great deal of hidden dangers. Therefore, it is also important to check the vehicle lights after the rain. If you find that there is fog in the car, you can turn on the lights and see if there is any sign of disappearing in the car. Once there is no improvement, it will be sent directly to the repair shop for repair.
Fe-Gr-Al fiber sintered felt filter media
Describe:
The Filter Material of iron-chromium-aluminum dust filter tube is made from iron chromium aluminum fiber through opening and loosening machine, then made into cotton by special technology, and then sintered by vacuum sintering furnace. Because of its deep labyrinth structure, the filtration effect is much better..
Fe-Cr-Al fiber sintered felt is a kind of metal fiber sintered felt with long service life, environmental protection and energy saving, high temperature resistance, resistance to deformation, no carbon deposition, foldable, good toughness and uniform pore size distribution. It is widely used in automobile tail gas treatment, burner, boiler retrofit, gas conditioning, glass annealing, food baking, oven, heater, paper painting, drying and so on.
Characteristics:
1. High temperature resistance 1200 degrees.
2. Strong cold and thermal shock ability.
3. No water absorption.
4. Thermal inert extremely small.
5. Combustion complete radiation .
6. Long service life.
Applications:
Fe-Cr-Al fiber sintered felt is widely used as filter material in chemical and European standard diesel vehicle exhaust emission equipment. Fe-cr-ai alloy porous body position three-dimensional junction network structure. The pore size is 0.1 mm and the porosity is up to85%, it is the best choice for monolithic catalyst support material.
Special Metal Filter Materials
Perforated Sheet,Special Metal Filter Materials,Special Material Filter,Perforated Sheet With Sintered Mesh
Henan Sinofiltec Technology Co.,Ltd , https://www.airfilters.pl