With the rapid development of the construction industry, the industry's demand for oil vehicles under the oil fields is getting higher and higher, but how much do you know about the understanding of oilfield ash cars? Here we will introduce the oilfield ash car.
The operating principle of the ash-removing vehicle in the oil field is to use its vehicle's power to drive the air compressor. The compressed air is sent through the pipeline into the air chamber in the lower part of the sealed tank to suspend the powdered material in the fluidized bed of the air chamber into a flow state. When the pressure in the tank reaches a certain value, the discharge valve is opened and the powdered material is conveyed through the pipe.
Oilfield carriage return structure:
1. Vehicle chassis: When using the operation, it should be operated in accordance with the instructions and operating instructions of the truck.
2. Power take-off device: It is a pneumatic internal gear meshing transmission type. The main function is to transmit the engine power in the transmission through the transmission shaft to the air compressor.
3.Air Compressor: Oil-free lubrication swing type air compressor
4. Air duct: It consists of four parts: air intake, air distribution, pressure relief, and secondary air supply. The air intake pipe connects the air compressor to the air chamber in the lower part of the tank. Valves are installed on the pipeline to stop the air in the tank from sucking into the air compressor. There are also red safety valves and pressure gauges on the gas distribution pipeline and the connection to the external air source. The pressure relief piping is installed on the top of the tank top to ensure that the inside of the tank is convection with the air and is controlled by the valve. The secondary air supply duct communicates with the discharge chamber of the lower air chamber of the tank body and is also controlled by a valve, which is mainly used to clear the pipeline.
5. Tank: It is a sealed device for loading powder materials. There is a walking platform at the top to facilitate loading and maintenance personnel to enter the tank. The cans have separate air chambers. The air chambers are composed of slides, fluidized beds, and special canvases that form a breathable layer to facilitate the mixing of air and particulate matter and form a fluid state. On the side below there is a handrail ladder, fenders and a base frame, which is used to connect the tank body and the car girder.
6. Unloading device: It can connect the powder and granular material vehicle with the storage tower (warehouse) pipeline, controlled by the valve, and is used to transport the material.
The above is the introduction of oilfield ashless cars. The oilfield ashless cars can grasp the demand of the construction site transportation market for the construction site, and continuously improve and adapt to the market demand. They are favored by many companies and hope that the above introduction can help everyone. .
Rotary Cultivator,Rotary Tiller,Rotary Tiller For Tractor,Tillers Rotary Cultivator
Hunan Nongyou Machinery Group CO.,LTD , https://www.ricemill.nl