Artificial stone decorative stone has been greatly developed in recent years, for its daily maintenance in the nursing industry should be taken seriously. As the artificial stone is a homogeneous, dense composite material, such artificial stone is more stable in performance than natural stone and reduces many shortcomings, such as eliminating cracks and delamination; containing less contaminated components; material homogenization; Should not react with chemicals; acid and so on. In this way, artificial stone rarely occurs in the use of natural stone such as white Hua, water spots, spitting, weathering, salt, rust, etching, surface contamination, loss of light, plastic pollution, stratification and so on. Therefore, the daily maintenance and conservation of artificial stone is much simpler than that of natural stone. This is one of the important reasons why artificial stone has been used extensively in interiors in recent years, especially in kitchens and bathrooms.
The daily maintenance of artificial stone is simpler than natural stone. The basic content of its maintenance is to keep it clean, dry and prevent scratches. The specific content is:
1 Clean the dust and sand of the artificial stone ground in a timely manner; Place brown mats at the gates and important people to prevent pedestrians from treading the ground;
2 Regular brushing of protective agent, protective agent should be multi-functional fluorine silicone resin type product can be, do not have to do crystal hardening and waxing protection;
3 Some important slippery pedestrians or children shall be prohibited from performing construction works such as cement mixing on the ground with anti-slip agent.
4 prohibit the installation of hooks and other load-bearing institutions on the wall;
5 Acid-alkali cleaning agent not available: Synthetic stone contains more than 95% of natural marble or quartz sand, while marble is limestone, the main component is calcium carbonate, so non-neutral substances will destroy its luster. In order to achieve the cleaning effect, cleaning agents sold in the market often use alkaline substances with good cleaning effect as raw materials, and the long-term use results in a decline in the gloss of synthetic stones. It is recommended to keep away from non-neutral acid-base items such as dilute hydrochloric acid and tile cleaners;
6 Not available General floor wax: The general floor wax is an oily wax. The wax sticks with dust to block the capillary pores and form wax scales, causing the surface to be dirty in the future. It is recommended to use a special curing agent for stone to enhance the effects of gloss, slip, abrasion, and static electricity.
7 Can not cover the carpet for a long time: For a long time, the carpet is covered on the surface of the synthetic stone without replacing or ventilating the moisture. The artificial synthetic stone itself cannot be released from the pores, causing the artificial synthetic stone to have a high moisture content and causing the appearance of later Water spot. It is recommended that if carpets must be laid, choose to maintain the artificial synthetic stone without a prestige. Dust is best to use a vacuum cleaner, or electrostatic mop, stores and other public places should put a dust pad;
9 To immediately remove easily-stained materials: artificial synthetic stones with natural pores, dyeing material will penetrate the inside of the stone along the capillary and attached to the surface, resulting in unsightly stains, difficult to remove. When there is a contaminant, it should be cleared immediately;
10 To maintain ventilation and dryness: Always keep indoor air flowing. The use of curing agents can have a protective effect to prevent moisture condensation and mold growth;
11 Maintenance of the stone before its first use: Clean the dust and sand on the stone surface with clean water, mop and rag;
12Spray a special protective agent for stone with a spray can, and drag it with a mop to make it dry and ventilated;
13 Avoid direct contact of artificial stone surface with dust and damage. It is recommended that foot pads be installed at the population to reduce external gravel into the room;
14 If the stone surface is seriously worn out and cannot be restored by the above method, it must be polished or polished by a professional stone maintenance company;
15Because there are still other works to be carried out on the site, the surface of the stone should be protected with tape, cardboard or plywood when necessary to prevent the surface of the stone from being scratched, scratched or contaminated. The tape used for protection must not be directly affixed to it. Stone surface
16 Protection after construction. Wash the dust and sand on the surface of the stone with clean water first; clean with a low-speed sander with a neutral detergent. Pay attention to the too rough grinding opportunity to damage the bright surface of the synthetic stone. Finally, rinse with appropriate amount of clean water. After cleaning, blot dry and water, and use protective agent in time.

Gantry Crane

Maximum Load:300.000t

Gantry Crane is a variation of bridge crane. It is well suited for use in storage yard or workshop that does not provide corbels for support. Two forms exist for the product: semi-Goliath and Goliath. With a maximum load handling capacity of 300t,the crane is commonly found at port, storage yard, and outdoor freight yard, where it is used to load or unload bulk goods or various others.

In a gantry crane, the main bridge beam is supported by two supporting legs that run along the rail at the ground level. The main beam can be extended at both ends by using the girder overhangs so that the peripheral area of workshop can be served.

The crane is vital to the material handling process. Crane problems may cause downtime and downtime costs customer`s money. Eurocrane product has always been supplied with consistent good quality, which is sure to become one of your preferred choices in logistics industry. Following is a list of main advantage of our crane product.

Leading Technology and Reliable Performance

We are a pioneer in the manufacture of European gantry cranes. Drawing on the valued experience and advanced techniques, we constantly bring revolutionary innovation to the crane industry. Each product has been rigorously tested prior to being launched onto the market. Hence Customers can purchase with confidence. Our product aims to help customers improve productivity, lower equipment maintenance cost, extend equipment use life, maximize return on the investment, and create more value for the customers.

Compact Structure and Modular Design for Optimized Customer Investment

In its compact body, the crane house many desirable attributes such as even load distribution, light weight, and minimum stress on the rail. It is designed to decrease construction cost and create ease of maintenance. Compared with other domestic cranes, our crane allows for 10% to 15% decrease in its dimension according to the loads that it handles. The heavier the load is ,the more decrease the crane allows in its dimension. In this way, customer comprehensive investment is optimized and rewarded with high rate of return.

Environmentally Sustainable Design for Space-and Energy-Saving

The compact design of our gantry crane leaves more space for industrial operation. All its components are sturdy and long-lasting, requiring limited maintenance. Reduction in weight and wheel stress leads to decreased energy consumption. It also lowers the level of requirements on raw materials during its manufacturing process.

Safe, Reliable, and Easy-to-Maintain

With leading manufacturing techniques, state-of-the-art manufacturing facilities, integrated production and strict control and assurance system, we are sure to design and produce premium-quality gantry cranes with exceptional performance. The concept of [easy-to-maintenance" is also incorporated into our design to ensure the final product possesses competitive edges over others of its contemporaries while allowing easy repair and operation.

More Configurations and Options to suit Your Needs

Our gantry crane can be supplied with various configurations to cover a wide range of lifting capacities, ranging from 8t to over 500t.Other options such as the turn over hoist,anti-sway device, automatic positioning device, winch servicing and monitoring device, or remote diagnostic tool are available as well. We also provide personalized, professional solutions to customers with our experience and advances techniques.

Gantry Crane

Gantry Crane,Rubber Tyre Gantry Crane,Container Gantry Crane,Gantry Crane

Eurocrane (China) Co., Ltd. , https://www.craneparts.pl