Anion collector positive flotation
Red iron ore easy floating main quartz and silicate gangue iron ore mirror, can use this method. Adjust the pH with sodium carbonate (7-9). Disperse sludge and sediment harmful metal ions. Use carboxylic acid as collector; or use petroleum sulfonate-fuel oil as collector, adjust pH to 4 with sulfuric acid, and the flotation particle size can be coarser. The prescription is simple and low in cost.
2. Anion reverse flotation
(1) Reverse flotation quartz with CaCl 2 (~100g/t) as activator, pH 11～12 with NaOH, hematite with starch (300g/t), and fatty acid as collector (500g/t) .
(2) reverse flotation apatite, phosphorus extremely harmful to iron, apatite anti-floating collector as a carboxylic acid, starch, and Na 2 SiO 3 inhibition hematite, about PH10.
3. Cationic reverse flotation
The magnetic separation iron ore concentrate contains a small amount of silica . It can be floated with primary and amine amines (0.3-0.5kg/t), and iron and minerals with starch and dextrin (0.5-0.7kg/t). PH10～ 10.5 (also 8 to 9). The advantage is that the mother liquor needs to be delimed in advance. It can be coarsely ground and has a high recovery rate, because in this case, several kinds of iron minerals can be floated differently without affecting the recovery rate. In order to eliminate the co-flocculation of iron oxide and quartz, it is possible to add an alcohol or a dodecyl sulfate.
4. Load flotation
In some fine grain low grade ore or iron ore tailings flotation, coarse iron minerals are also used as carriers to increase the flotation rate and recovery rate of fine particles.
5. Select flocculation - (reverse) flotation iron
After the first use NaSiO 3 or NaOH (NaPO 3) 6 finely ground (e.g. -37μ) dispersion of mineral particles, then adding starch or iron minerals selected humic acid flocculation, removal of fine mud, using any of the above The reverse flotation method is reverse flotation, and the iron concentrate is obtained from the bottom of the tank. The biggest disadvantage of this method is that it needs to be finely ground, so that the cost and energy consumption are too high.
FURD Ride On Laser Screed:
-Used high accuracy laser device, close loop control technology and precision integrated hydraulic system, and microcomputer automatic control.
-The flat and dual slope can be fully automatic controlled by the transmitter. For the complex floor which has high requirement for drainage, the 3-D floor processing system can be used.
-Steering, forward and reverse of the machine are all controlled by the integrated handles. Operation buttons and controller which are located on the one side of th seat, is user-friendly.
FURD walk behind Laser Screed :
-Adopts imported laser transmitter and receiver.
-Adopts Honda gasoline generator with electric start.
-Two kinds of tyres optional.
FURD factory also produce the below machines:
Vibratory Road Roller, Power Trowel , Light Tower , Road Repair Machine, Road Marking Machine.
For more information of our products, please feel free contact with us, we are at your service for 24 hours.
Laser Screed
Laser Screed,Concrete Laser Screed,Laser Screed Machine,Copperhead Laser Screed
Jining Furuide Machinery Manufacturing Co., Ltd. , https://www.vibratoryroller.nl