Esab250 MIG Gas Welding TorchÂ
Item | MIG/MAG HRES250 Air-Cooled CO2/Mixed Shielded Welding Torch |
Rating | 250A CO2/ 220A Mixed Gas, Duty Cycle 60% Wire Diameter: 0.8-1.2mm |
Rear Connector | Esab Connector, Esab Euro Connector |
Certification | ISO9001, CCC, CE, ROHS, TUV |
Packing | 1set/box neutral packing, 5sets/Carton Box |
 |  |
Welding Gas Nozzle/ CO2 torch nozzle | |
A366-854-881 | Nozzle ¢14mm |
A366-946-881 | Nozzle ¢12mm |
Welding Contact tip / Torch tip | |
B153-500-001 | Contact Tip E-CU M6*30*0.6mm |
B153-500-002 | Contact Tip E-CU M6*30*0.8mm |
B153-500-003 | Contact Tip E-CU M6*30*0.9mm |
B153-500-004 | Contact Tip E-CU M6*30*1.0mm |
B153-500-005 | Contact Tip E-CU M6*30*1.2mm |
Welding Torch Liner | |
C366-549-882-B | Steel Liner 0.6-0.8mm, 3m |
C366-549-883-B | Steel Liner 0.6-0.8mm, 4.5m |
C366-549-884 | Steel Liner 0.9-1.0mm, 3m |
C366-549-885 | Steel Liner 0.9-1.0mm, 4.5m |
C366-549-886 | Steel Liner 1.2mm, 3m |
C366-549-887 | Steel Liner 1.2mm, 4.5m |
Welding Torch Spare parts: Gas Diffuser, Tip holder, Swan neck | |
D366-396-002 | Nozzle Insulator |
D366-314-001 | Gas Diffuser |
D366-397-001 | Diffuser Insulation |
D366-315-880 | Swan Neck |
Changzhou Huarui Welding & Cutting Co., LTD
Since the establishment in 1985, we have become one of the biggest manufacturers of welding
and cutting equipment and accessories in China by modern manufacturing equipment and special technology.Â
We are specialized in manufacturing MIG, TIG, PLASMA, Welding Torches and Spare parts. With Euro
connector, Lincoln connector , Miller connector and Tweco connector, we can fit different kinds of foreign
equipments.
1.MIG Welding Torch
Binzel, Bernard, Tweco, Esab, Lincoln/Tregaskiss, Panasonic/OTC, MAXI, Kemppi, Fronius, Mechafin.
2.TIG Welding Torch
WP-24, WP-9,WP-17, WP-26, WP-20, WP-18, etc.
3.Plasma Cutting Torch
Trafimet, Cebora, Panasonic/Esab
FAQ
Q1: Can I get a samples to check the quality?
A:Sure,we can supply samples. For regular goods, the sample cost is different from the amount you want.
For our new products, there's a MOQ of the samples.
Q2: Can I put my logo on the boxes/cartons?
A: Yes, this can be made according to your requirements, but you should send us the trademark authorization
letter.
Q3: How can you guarantee your products quality ?
A: Huarui's each torch must pass the following tests before packing: Insulation resistance test, High voltage
test, Air/Water flow test, Air/Water seal test.
If there are defective items, we usually credit to our customer or replace in the next shipment.
Q4: What's the order procedure?
A: Firstly, we discuss the details together by e-mail or TM. Then we issue you a PI for your confirmation or
Trade Assurance Order Payment Link. You will be requested to do the pre-paid full payment before we go
into the production. After we get the payment, we start to process the order. It usually takes 5-15days if we
don't have the items in stock.
Â
Pneumatic hoist is an upgraded product of electric hoist, which has been widely used in all walks of life. The load range varies from 250 kg to 30 tons according to different models. The pneumatic hoist can be driven only by providing a certain pressure of compressed air, which achieves low energy consumption and high efficiency. It also has the function of gas cut-off protection to ensure that the workpiece does not fall or fall in the event of a sudden gas cut-off. Cooperating with various non-standard fixtures, the pneumatic hoist can lift workpieces of various shapes.
Pneumatic Air Chain Hoist,Durable Pneumatic Hoist Air Chain Hoist,Pneumaticchain Air Chain Hoist,Explosion Proof Pneumatic Chain Hoist
Hengshui Tianqin Import and Export Trade Co.,Ltd , https://www.itahoists.com