You may have fallen into the misunderstanding of these 9 major agricultural machinery

9 major agricultural machinery misunderstandings

The deeper the loose work, the better

You may have fallen into the misunderstanding of these 9 major agricultural machinery

Deep loosening is one of the important measures to promote conservation tillage. The depth of deep-slung work is determined by the layer of soil in the soil. Each area, even each plot, may be different. If the deep loose operation is too deep, the main hazard is that the deep and bad soil may be brought to the surface layer, which is not conducive to the growth of the crop; or the deep loose shovel is too deep and passes under the soil layer. Did not break the knot layer, the deep loose rod teeth like the knife to cut the tofu, cut through the knot layer, the deep loose effect is compromised. In addition, the fuel consumption of the tractor is greatly increased. Therefore, as long as the deep shovel can pass through the slab layer and break the slab layer, it is a reasonable depth of ploughing, not as deep as possible.

High-powered tractors must be "pressed"

The greater the power of the tractor, the greater the weight. It feels that the high-powered tractor is more "pressed" than the small tractor, that is, the pressure on the unit area of ​​the soil is greater. In fact, large-horsepower tractors mostly use two-wheel drive, or use radial tires with large grounding area, and some even use rubber track structure. The grounding pressure of high-powered tractors is likely to be smaller than that of small tractors. Especially after the use of wide-width and double-working agricultural implements, the number of tractors entering the ground is greatly reduced, and the "compacting" damage of the high-powered tractor on the soil is much lower than that of the small tractor.

Tractor is more important than farm tools

As long as the power level of the tractor is selected correctly, the main factor determining the quality of the agricultural machinery operation is the agricultural implement rather than the tractor. More and more people have found that the selection of tractors has been over-emphasized, and the selection of agricultural tools has not been taken seriously, which directly affects the economic benefits of agricultural machinery operators. In foreign countries, the price of some agricultural tools is close to or even higher than the price of tractors, which is unacceptable to many of us. At present, this situation is changing. There are several imported brands of agricultural tools that have been recognized by users. High-performance agricultural implements are at least twice as high in price as ordinary agricultural implements, and some even reach 2-3 times or more. The same level of high-powered tractors and advanced tractors are more expensive than ordinary tractors. Will not exceed 1 time. More and more people have realized that, to a certain extent, the choice of agricultural tools is more important than the choice of tractors, because the quality and benefits of work are often determined by farming tools.

Low price will definitely cost-effective

If you buy agricultural machinery, only use 1-2 years, it is likely that the price is low, which means high cost performance. However, agricultural machinery is not a general consumer product. For agricultural machinery with a service life of at least 10 years or longer, low prices do not necessarily mean high cost performance. There is an article on the Internet that says that Germans do not believe that "good quality and low price" is justified. China, which has basically realized agricultural mechanization, most people buy agricultural machinery is no longer a purchase, everyone will have their own personal experience, cost-effective products must be those with high quality and service level.

User is "God"

When the user chooses the agricultural machine, he regards himself as “God” and puts various conditions on the merchant (manufacturer or dealer), even those unreasonable conditions, such as excessive price reduction, etc., the manufacturer or the dealer is sold for sale. Forced to agree to the corresponding conditions. Once the sale is completed and the full amount is recovered, especially after the end of the warranty period, the manufacturer or dealer becomes “God”, and the service requested by the user is slow, and the spare parts supply cycle is long and the price is extremely high. This relationship between the user and the merchant is incorrect and unsustainable. In fact, users and businesses, who are not "God", are an equal business partnership. The "strong" of either side will bring the ultimate "double loss" rather than a win-win situation.

Take your own money "full payment" purchase

The purchase of agricultural machinery, especially the purchase of large-scale agricultural machinery, users have to buy their own full amount, has become less and less. At the same time, merchants are subsidizing or subsidizing, but the profits are very high or the merchants are willing to bear the risks. Ordinary users will use bank loans, or through the merchant's rental company, to purchase agricultural machinery by installment payment. The sales of agricultural machinery are completed by the three parties through the cooperation of users, banks or leasing companies and merchants. The advantage of this is that the user can use the "leverage" to purchase the higher value agricultural machinery, the merchant will get a certain guarantee on the collection, the user owes the money owed by the user in installment payment is no longer the merchant, but the bank or lease the company's. The support of financial institutions such as banks and leasing companies has become an essential part of agricultural machinery sales, especially for large-scale agricultural machinery sales.

"Follow the wind" to buy agricultural machinery

If any agricultural machinery is too large in a certain area, it will bring about a reduction in the workload of a single machine and a decrease in economic efficiency. Especially for large-scale agricultural machinery with a value of more than one million, once the local quantity reaches saturation, there will be “supply side overcapacity”, and everyone’s economic benefits will decline. If then, planting structure adjustment or agricultural product price adjustment will occur again. Users who purchase agricultural machinery by installment payment will inevitably be "stressed" and worse. The purchase of agricultural machinery is investment, investment has risks, risks often come from the size and stability of the workload, must not be "follow the wind" to buy, must make rational thinking before making a decision.

"Agricultural Machinery Market"

There are a large number of "agricultural machinery market" in different places, which gathers a large number of agricultural machinery brands, which is conducive to users' "one-stop" purchase of a variety of products. The historical role played by the agricultural machinery market and the current real impact cannot be underestimated. However, with the popularity of automobiles and the Internet, and the popularity of special smartphones, the agricultural machinery market is no longer the only place where you can see and understand various agricultural machinery. More and more people are willing to learn more about the technical performance of a machine through the Internet, understand the specific word of mouth through the circle of friends, and even go to the field to understand the actual performance of the machine. Not long ago, according to reports, an internationally renowned company sold a 120-horsepower tractor through the rural Taobao platform of the Alibaba Group. Although the current popularity of this type of sales is difficult to say, at least it can be seen that some of the advantages of the traditional "agricultural market" are facing the challenges of the Internet. With the application of the O2O model in the agricultural machinery industry, the “agricultural market” will become less important and even disappear.

Agricultural machinery included in the subsidy catalogue is advanced

For some time, everyone thought that the products that can be included in the subsidy catalogue, after strict promotion and appraisal and review by relevant departments, must be good products, so that when some subsidized products are found, they are not technologically advanced. Users, or when there are quality problems, users will be very annoyed. In fact, the promotion of identification work is very specific, the workload is very large, a new product, to be able to enter the subsidy catalog and enjoy subsidies, it takes about 2 years. That is to say, the product technology in the subsidy catalog is 2 years ago or even earlier.

At present, the agricultural machinery products of some large-scale agricultural machinery enterprises at home and abroad have big technical improvements every year, and new products representing new technologies will be introduced. Therefore, it can be said that the current good agricultural machinery is not necessarily in the subsidy catalogue. (Original title: Agricultural machinery listed in the subsidy list must be advanced?)