Yongjin Machinery has developed a new high-precision, high-speed NDV series mold processing machine for the mold processing industry. It has many features in both hardware and software. It is not only the best choice for mold processing industry, but also leads the mold processing industry. To a higher level of technology application.
This series of spindle horsepower 30HP, equipped with a ceramic ball bearing built-in spindle, the speed of 20,000RPM. Its double force collet, the spindle broach force reaches 12,000N, can enhance the static rigidity of the arbor and the main shaft, shorten the length of the main shaft, reduce the quality of the rotating parts, and maintain a good dynamic balance. Supplemented by the spindle oil and gas lubrication system, it effectively takes away the heat source generated by the processing and maintains a certain precision for a long time.
In addition, the three-axis super-large stroke 1,020 × 600 × 600mm, with the large THK roller type line rail, fast escort speed 30m / min, to meet the processing needs of a variety of molds. Hobbing cam type automatic tool change system, the maximum number of tools is 30T, and the bidirectional tool changer can shorten the tool change time and improve the processing efficiency. The main casting structure is calculated by computer precision, which is in line with the optimized track span configuration, structural mechanics design, light weight, high rigidity, machine rigidity and cutting stability performance.
This series combines Yongjin's superior equipment and exclusive high-performance software to complete fine cutting surfaces through HRM high-resolution modules. M300 high-performance processing mode provides five sets of parameter settings and options. Mode to achieve the best processing results.
This series of spindle horsepower 30HP, equipped with a ceramic ball bearing built-in spindle, the speed of 20,000RPM. Its double force collet, the spindle broach force reaches 12,000N, can enhance the static rigidity of the arbor and the main shaft, shorten the length of the main shaft, reduce the quality of the rotating parts, and maintain a good dynamic balance. Supplemented by the spindle oil and gas lubrication system, it effectively takes away the heat source generated by the processing and maintains a certain precision for a long time.
In addition, the three-axis super-large stroke 1,020 × 600 × 600mm, with the large THK roller type line rail, fast escort speed 30m / min, to meet the processing needs of a variety of molds. Hobbing cam type automatic tool change system, the maximum number of tools is 30T, and the bidirectional tool changer can shorten the tool change time and improve the processing efficiency. The main casting structure is calculated by computer precision, which is in line with the optimized track span configuration, structural mechanics design, light weight, high rigidity, machine rigidity and cutting stability performance.
This series combines Yongjin's superior equipment and exclusive high-performance software to complete fine cutting surfaces through HRM high-resolution modules. M300 high-performance processing mode provides five sets of parameter settings and options. Mode to achieve the best processing results.
The Tire Shredder is used for crushing the whole waste steel wireradial tire under normal temperature. The tire rubber chips are less than 50x50mm.
Tyre shredder mainly consists of motor, speed reducer, machine frame, twin shafts, shredding blades, rotary screener, transmission system, etc.
The Tyre Recycling Shredder adopts low noise, steady and high torque planet-gear speed reducer, easy and safe operation
The Car Tyre Shredder is low consumption, high output and advanced technology.
Tire Shredder,Tyre Shredder,Car Tyre Shredder,Tyre Recycling Shredder
SUMAC AUTO RECYCLING EQUIPMENT CO., LTD , https://www.autorecyclingchina.com