XZK-1 Intelligent Vibration Monitor The vibration intensity meter produced by our factory is equipped with a vibration velocity sensor. It can monitor the vibration intensity of rotating machinery for a long time and can monitor the vertical and horizontal vibration of the rotating machinery. The value of the vibration intensity is from the front panel of the instrument. The meter shows that it has a standard current output and can be connected to various DCS and PLC systems. When the vibration value exceeds the limit, the instrument can be connected with an audible and visual alarm to prompt the on-site operator to take preventive measures and have an alarm. Dangerous switch output to protect the machine safe and reliable operation.
The main function
Turbine, water turbine, compressor, blower and other rotary machinery vibration monitoring and protection of the bush.
Functional description (smart):
1. Display function vibration measurement value, I value alarm, II value alarm setting value, can be displayed on LED digital tube respectively.
2. Alarm function When the intensity of vibration exceeds the alarm setting value, the alarm indicator is on. At the same time, the switch signal is output on the rear panel to protect the monitored equipment.
3. Alarm delay time setting function The alarm delay time adjustment range is 0 to 3 seconds to prevent false alarms caused by on-site interference.
4. The self-diagnosis function is equipped with power-on and power-off detection functions, and the alarm output circuit is disconnected at the same time, which can effectively suppress the false alarm of the instrument.
5. The output interface has a current output interface, which can be connected with computers, DCS, PLC systems, paperless recorders and other devices.
Technical Parameters:
1. Sensor input: vibration speed sensor, sensitivity: 20mV/mm/S±1%, frequency response: 5～1000Hz
2. Display mode: 3-digit digital display, accuracy: ±0.5%
3. Measurement range: 0-500μm (peak-peak)
4 current output: 4 ~ 20mA or 0 ~ 10mA, load ? 500Ω
5. Alarm contact capacity: AC220V/3A, DC28V/3A
6. Working Environment: Temperature: 0-55°C Relative Humidity: ≤95%
7. Working power: AC 220VAC±10% 50Hz Power consumption≤10W
8. Installation method: Disc type
9. Overall size: 160 (width) × 80 (high) × 250/200/150 (deep) mm
10. Opening size: 152(W)×75(H)mm
Instrument features:
1. The vibration sensor used in the XZK-1 vibration monitor is a magnetoelectric speed sensor. The sensor is based on the principle of electromagnetic induction. It does not require a power supply, and has a low coil impedance, high output voltage, and strong anti-interference.
2. The instrument uses advanced micro-computer chips and technology to reduce the volume and improve reliability.
3. With 90-260VAC wide range input power supply voltage. The use of switching power supply design greatly reduces the weight of the instrument.
4. The instrument can be used to enter any vibration warning value, vibration alarm value, and delay time. The reservation of all these parameters will not disappear due to power failure.
5. The watchdog timer inside the vibration monitor can protect the system and improve the chip's anti-interference ability, making the instrument work more reliable.
6. The vibration monitor adopts digital correction system and self-calibration technology. The measurement is accurate and stable, eliminating measurement errors caused by temperature drift and time drift.
7. The vibration monitor is generous in appearance and equipped with a 0.8-inch high-brightness digital tube. The digital display is clear and stable.
The main function
Turbine, water turbine, compressor, blower and other rotary machinery vibration monitoring and protection of the bush.
Functional description (smart):
1. Display function vibration measurement value, I value alarm, II value alarm setting value, can be displayed on LED digital tube respectively.
2. Alarm function When the intensity of vibration exceeds the alarm setting value, the alarm indicator is on. At the same time, the switch signal is output on the rear panel to protect the monitored equipment.
3. Alarm delay time setting function The alarm delay time adjustment range is 0 to 3 seconds to prevent false alarms caused by on-site interference.
4. The self-diagnosis function is equipped with power-on and power-off detection functions, and the alarm output circuit is disconnected at the same time, which can effectively suppress the false alarm of the instrument.
5. The output interface has a current output interface, which can be connected with computers, DCS, PLC systems, paperless recorders and other devices.
Technical Parameters:
1. Sensor input: vibration speed sensor, sensitivity: 20mV/mm/S±1%, frequency response: 5～1000Hz
2. Display mode: 3-digit digital display, accuracy: ±0.5%
3. Measurement range: 0-500μm (peak-peak)
4 current output: 4 ~ 20mA or 0 ~ 10mA, load ? 500Ω
5. Alarm contact capacity: AC220V/3A, DC28V/3A
6. Working Environment: Temperature: 0-55°C Relative Humidity: ≤95%
7. Working power: AC 220VAC±10% 50Hz Power consumption≤10W
8. Installation method: Disc type
9. Overall size: 160 (width) × 80 (high) × 250/200/150 (deep) mm
10. Opening size: 152(W)×75(H)mm
Instrument features:
1. The vibration sensor used in the XZK-1 vibration monitor is a magnetoelectric speed sensor. The sensor is based on the principle of electromagnetic induction. It does not require a power supply, and has a low coil impedance, high output voltage, and strong anti-interference.
2. The instrument uses advanced micro-computer chips and technology to reduce the volume and improve reliability.
3. With 90-260VAC wide range input power supply voltage. The use of switching power supply design greatly reduces the weight of the instrument.
4. The instrument can be used to enter any vibration warning value, vibration alarm value, and delay time. The reservation of all these parameters will not disappear due to power failure.
5. The watchdog timer inside the vibration monitor can protect the system and improve the chip's anti-interference ability, making the instrument work more reliable.
6. The vibration monitor adopts digital correction system and self-calibration technology. The measurement is accurate and stable, eliminating measurement errors caused by temperature drift and time drift.
7. The vibration monitor is generous in appearance and equipped with a 0.8-inch high-brightness digital tube. The digital display is clear and stable.
SICHUAN TELOS NEW MATERIAL TECHNOLOGY CO., LTD , https://www.sichuankenlarcutters.com