The use of DC high voltage generator

DC high-voltage generator adopts high-frequency double voltage circuit, takes the lead in applying the latest PWM high-frequency pulse width modulation technology, closed-loop adjustment, adopts large voltage feedback, greatly improves voltage stability, and uses high-performance IGBT devices with excellent performance and its Drive technology, and according to electromagnetic compatibility theory, using special shielding, isolation and grounding measures, so that DC high voltage generator achieves high quality, portable, and can withstand rated voltage discharge without damage.

Current limiting resistor instructions

1. Current limiting resistor function: When the test piece breaks down or flickers, it acts as a limiting current, so as not to damage the test equipment.

2. How to use: As long as the end of the current limiting resistor M10 nut screwed to the top of the DC high pressure doubler cylinder, high pressure output line bolts can be. If you want to connect in series high pressure microampere meter (optional optional SWB-V type table) , as long as the bottom of the micrometer table M10 nut screw on the other end of the current limiting resistor.

3. If a smart DC high voltage generator is used, when the sample is a zinc oxide surge arrester, a general valve arrester, and a high voltage switch, etc., the current limiting resistor may not be used. That is, if a small current or small capacitance test item is used, the current limiter may not be limited. resistance.

4. Large-capacity test items such as power cables, transformers, and motors should be tested in series with a current limiting resistor in the high-voltage loop to protect the test equipment.