First, to save energy and develop renewable energy 1. To greatly increase industrial energy efficiency.
The first is to promote the upgrading of traditional industries. Improve the definition of backward production capacity, timely adjust the unit's industrial added value energy consumption quota standard, and resolutely eliminate the backward production capacity that does not meet the energy consumption quota standard: strengthen research and development, introduction, digestion, absorption and reinvention of energy conservation technologies, accelerate the use of high technology And information technology transformation to upgrade traditional industries. The second is to continue to implement key energy-saving projects such as the transformation of coal-fired industrial boilers (kilns), regional cogeneration, residual heat and pressure utilization, energy conservation and alternative petroleum, energy-saving motor systems, and energy system optimization. The third is to do a good job of energy saving in key enterprises. To implement energy-saving actions for industrial enterprises with an annual comprehensive energy consumption of 150,000 tons of standard coal or above, and do a good job of monitoring, management, and assessment of target responsibilities for key enterprises. Fourth, implement two-way adjustment and differential management of industrial energy supply and demand.
2, focus on promoting building energy efficiency. The first is to integrate ecological concepts into architectural planning, design, and construction. And in the production of building materials, the building can fully adapt to the cyclic movement of the ecosystem material and energy, and use environmentally friendly and energy-saving building materials that are harmless to the human body. Make full use of geothermal energy, solar energy and wind energy to meet the energy consumption of buildings. The second is to improve and improve building energy efficiency standards. Further clarify and strictly implement the building energy-saving reform standards, strengthen the energy-saving management of new buildings, ensure that the proportion of implementation of mandatory energy-saving standards in the construction phase is continuously increasing, and the suppression of high-energy-consuming buildings from the source appears. Third, vigorously promote the scientific and technological innovation of construction materials, and strive to achieve new technological breakthroughs in the field of wall insulation, door and window insulation, green lighting and other fields: to strengthen the maturity, application of building energy-saving new technology achievements transformation and promotion, and encourage and support solar energy and other renewable Energy is used on a large scale in the construction sector. The fourth is to launch pilot demonstration projects for green buildings with key projects as the carrier, promote new building energy-saving technologies and new products, and nurture green building design and construction teams.
3. Promote the orderly development of renewable energy and new energy sources. We must focus on new technologies and new processes for the development and utilization of "green energy" such as solar energy, geothermal energy, wind energy, ocean energy, nuclear energy, and biomass energy. Implement a number of demonstration projects with breakthroughs: Accelerate the evaluation, demonstration and approval of nuclear energy projects, and strengthen the safety supervision of the operation of nuclear energy companies: Accelerate the establishment of market access conditions and technical standards for the development of renewable energy, and avoid blind development: Improve the equipment level and technical level of the power grid dispatch automation system: Improve the on-grid tariff of renewable energy power generation projects, and use economic policies such as price and taxation to promote the scientific development of renewable energy.
SF-200 is a Hand belt type resistance Forming Machine which is the best selection for mass production.Easy adjustment,operation and long life.
SF-201 is the same as SF-200,Beside above ,they are Loose Tape resistance Former suitable for vertical or horizontal shaping of resistors and diodes.
SF-202Component bending forming machine is bulk, with resistance and diodes are available.Foot cutting, bending can be strengthened, foot long span can be adjusted.
SF-208FB Axial automatic resistor machine has three Models for Processing Different Type of Packing.
SF-206 The bulk Resistor Former has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.
SF-208 Equipment K Type Resistance Molding Machine has three Models for Processing Different Type of Packing.â‘ Loose packed Model(SF-208-FA).â‘¡Taped Model(SF-208-FB).â‘¢ Loose packed/taped combinative Mode(SF-208-F).
SF-206MB The axial lead former m type has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.It is also means automatic resistor forming m machine.
Resistance Molding Bending Machine,F Resistor Cutting Machine,Component Cutting Forming Machine,Components Lead Cutting Machines
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com