Dongguan Haida Instrument Co., Ltd. started to research and develop refrigerator testing equipment according to the requirements of French customers. After 2 months of research and development department of Haida devoted to research and repeated testing, it finally successfully produced China's first refrigerator door life testing machine, to fill in China's refrigerator door detection gap! This refrigerator door life testing machine has been successfully delivered to customers in France and has been fully affirmed!
First, use:
The tester is suitable for the life test of opening and closing capability of the door. It adopts the pneumatic drive method, uses the air cylinder as the power, and drives the telescopic connecting rod to make a reciprocating linear motion, thereby completing the “open and close†of the door and pushing and pulling the drawer. Action, simple operation, easy control.
Second, according to the standard of the instrument reference standards: ISO15502-2005, GB/T8059-1995, GB/T8059.2-1995, GB/T8059.3-1995, GB/T8059.4-1995, GB4706-2008, IEC60335 requirements .
Third, pay attention to this instrument as far as possible not to use in the following occasions:
1, in the vibration, swinging occasions.
2, direct sunlight.
3, high temperature, dusty, damp place.
4. The AC power supplied to this unit should be well grounded to ensure safe use.
5, is strictly prohibited using strong solvents (such as: benzene, nitro-type oil) cleaning machine rake.
6. Water and debris should not be injected into the machine to prevent damage and electrical shock to electrical components.
7. The disassembly and assembly and debugging within the instrument display can only be performed by the unit approved by the Ministry of Metrology and the company. Others are not allowed to dismantle it.
First, use:
The tester is suitable for the life test of opening and closing capability of the door. It adopts the pneumatic drive method, uses the air cylinder as the power, and drives the telescopic connecting rod to make a reciprocating linear motion, thereby completing the “open and close†of the door and pushing and pulling the drawer. Action, simple operation, easy control.
Second, according to the standard of the instrument reference standards: ISO15502-2005, GB/T8059-1995, GB/T8059.2-1995, GB/T8059.3-1995, GB/T8059.4-1995, GB4706-2008, IEC60335 requirements .
Third, pay attention to this instrument as far as possible not to use in the following occasions:
1, in the vibration, swinging occasions.
2, direct sunlight.
3, high temperature, dusty, damp place.
4. The AC power supplied to this unit should be well grounded to ensure safe use.
5, is strictly prohibited using strong solvents (such as: benzene, nitro-type oil) cleaning machine rake.
6. Water and debris should not be injected into the machine to prevent damage and electrical shock to electrical components.
7. The disassembly and assembly and debugging within the instrument display can only be performed by the unit approved by the Ministry of Metrology and the company. Others are not allowed to dismantle it.
Polyester Polyols For Polyurethane Adhesives
Polyester Polyols For Polyurethane Adhesives,Desmopan Tpu Adhesive,Polyester Polyol Adhesive For Shoe,Polyesters Pur Hot Melt Adhesives
Xuchuan Chemical , https://www.xctpu.com