Compression docking garbage truck is doing routine maintenance, while maintaining the body work, more drivers will ignore at the same time, on the maintenance of the various parts of the garbage truck to close the above-mentioned maintenance links. Feel that the body and interior are clean, the window glass, front and rear windshield wipe with whatever rag wipe on the line, the other there is not much demand, as long as it is clean it. However, when the window glass of the docked garbage truck is scratched, it will cause some influence on the driver's driving sight. If the garbage and the glass are damaged, it will also have a certain loss. Therefore, when driving a compact docking garbage truck, it must be a good protection for the front windshield of the vehicle. However, what kind of protection is effective?
1, to keep the glass of the compression docking garbage truck in a clean and translucent state, especially for the front windshield, this is the most important ring that can make the driver have a good driving vision, if the former When there are some more viscous objects on the windshield, be sure to wipe it with a towel. Do not use something with any sharp object to try to wipe. For the selection of compressed glass water on the docking garbage truck, it must be used for vehicles, and the four seasons should be used separately. The glass water must not be used indiscriminately to avoid damage to the window glass.
2. The front windshield of the compression docking garbage truck will be marked with a number of annual inspections. It must be an electrostatic sticker. If you use a glued film, it will be very difficult to tear off the minute. , and will also scratch the front windshield.
3. When driving a compact garbage truck, do not follow behind the buttocks of large vehicles such as large trucks, trailers, etc., and if the front tires of the vehicle collapse the stones, give the front windshield of your own vehicle a bullet. Injury is not good.
4. In the summer or winter when the docking garbage truck is compressed, the company is best to park the garbage truck in the garage under conditions, not only the car needs to do antifreeze work, but also to compress the garbage truck. It is no exception.
Aluminum precision machining is one of the most common machining processes in the CNC machining industry. Due to the characteristics of light density, high strength and good corrosion resistance of aluminum alloys, aluminum alloy parts are widely used in the manufacturing industry. Aluminum alloy has good cutting performance, CNC machining aluminum alloy has low cost and high precision, and it is relatively easy to meet the quality requirements compared to processing steel. However, because the aluminum alloy is relatively soft, it is easy to cause deformation during the clamping and processing process, and the surface of the workpiece is also prone to bumps or scratches.
Aluminum Precision Machining Parts are relatively simple for SCZY. We are professional and experienced in machining titanium alloy, molybdenum alloy, stainless steel, steel, copper and other parts. We have complete processing equipment, experienced production engineers and experienced quality inspection engineers. We will strictly control each process to ensure the production of qualified products.
Aluminum Precision Machining,Aluminum Machining Center,Aluminum 5 Axis Machining,Aluminum Cnc Machining,Aluminum CNC Machining Services
Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com