As the saying goes, "The car is bad first." Chassis armor is a new project for chassis rust prevention in recent years. It is sprayed with a layer of viscous rubber varnish on the surface of the car chassis. It is non-toxic and sprayable. After drying quickly, it forms a layer of 2–4 mm thick elastic seal. It will not flow or sags at temperatures up to 148.89 degrees Celsius. It is like putting a thick coat of armor on the chassis of the car.

Chassis armor has many advantages:
A: Chassis anti-corrosion: the car's corrosion starts from the bottom plate, the South has always been more wet weather, plus you will remain in the bottom of the car wash water every time, long-term will form a potential corrosion factor, causing damage to the car. After the maintenance of your car's bottom, even acid rain, snow-melting agents, and car washes will not be able to penetrate this protective film.

II: Anti-stone hit: When the vehicle is in the process of driving, it will splash small stones. The force of the stones impacting the floor is proportional to your speed. After the bottom of your car is maintained, then even if the gravel is impacted with a force of 300 kg, it cannot be broken. it.

Three: Earthquake: The engine and the wheels are fixed on the floor of the car. Their vibrations will resonate with the bottom plate at a certain frequency, causing people to feel uncomfortable. The bottom protection will automatically eliminate this resonance.

Four: Insulation and fuel economy: In summer, the air-conditioned air conditioner in the vehicle's interior is lowered, and the floor air outside the vehicle is increased. Hot and cold air is mostly concentrated on the floor of the vehicle to be exchanged. The effect of the vehicle bottom protection is directly determined by the vehicle. The effect of the use of cooling energy.

V. Sound Insulation Noise Reduction: The vehicle is driving on the fast track. The friction between the wheel and the road surface is proportional to the speed. The vehicle's intact bottom protection can greatly reduce the noise in the vehicle.

6: Anti-drag bottom: The thickness of the bottom maintenance material can reach 1.5-2.5 mm. When the bottom is scratched by the road surface protrusion, it will reduce the damage to the chassis; especially on the highway, the road surface friction is large. The sound is also noisy, the chassis makes the noise very small, and the warm air is good for heat insulation. Even if the warm air is turned off, it can maintain the temperature for a long time.

Seven: Provincial maintenance costs, automobile preservation: Because the chassis supports the four major automotive systems, the protection of the chassis is equal to the protection of the above systems, saving a series of maintenance costs incurred for this purpose. Normally, a new car will be rusted for about three years. The corresponding fact is that the better the vehicle maintenance, the higher the value. After a period of driving, it is protected by a solid shield chassis, whether it is for use or for a new car. Suitable for all kinds of heavy duty vehicles.

Manual Saw Blade Pipe Cutting Machine

1. Servo motor driving feeding system with AC servo motor / C5 level ball guide screw and linear guide rail, fast, stable and accurate. Maximum feeding speed of 1000mm / s and feeding length of 1000m, multiple feed.
2. Gearbox driving Saw Blade, is produced by casting and processing by CNC machining center, which is stronger and more accurate. Inside, the core components of gearbox are imported from Taiwan, which produced with advanced milling and vacuum heat-treatment, so they are precise and long lifetime, lower noise and high transmission efficiency. Saw blade can work stable and process in long lifetime.
3.The special designed clamp has strong clamping capacity, firm, safe and reliable.
4. Automatic circulation of coolant ensures smooth cutting surface and long service life of saw blade.
5. Great Clamping device of pipes can decrease pipes vibration during working to extend saw blade lifetime and guarantee feeding speed with the Patent No.ZL 2009 1 0039079.8
6. Servo tail processing device, when the material is more than 100mm left, automatically cut the tail, avoiding that after the former automatic pipe cutting machine has finished cutting, the tail should be cut again separately, saving material and labor and improving production efficiency. Min tail length is 20-30mm.
7. Stop gauge is equipped, that used as keeping alignment of pipes and providing original point for system in order to improve preparing time and avoid the mistake of feeding by manual.
8. Control system is developed by Chittak that is with rich database, and can be updated. Easy operate.
9. It is equipped with an automatic detection and alarm information system, which is convenient for users to troubleshoot.
10.Using Mitsubishi PLC controller, the circuit is simple and the maintenance is simple, response is fast.
11.Can set 5 different cutting lengths for a single material to reduce waste of surplus materials.
12.Length digital display and easy setting and operating in control system.
13.The model can be updated with automatic loading system that can greatly improve efficiency and save the labor cost. Meanwhile, it can be equipped with conveyor belt to transport the finished goods to next machine process. All updated functions can be controlled by Cutting Machine System.

Pipe Cutting Machine Blade,Manual Pipe Cutting Machine,Manual Saw Pipe Cutting Machine,Pipe Cutting Machine Saw Blade

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com