Model NO.: NE model lifting chain for elevators
Samples: Free
Standards: Produce According to Approved Drawing
Structure (for Chain): Roller Chain
Trademark: DCC
Specification: ISO, SGS
Origin: Changzhou, Jiangsu, China
HS Code: 731589
Model NO.: NE model lifting chain for elevators
Samples: Free
Standards: Produce According to Approved Drawing
Structure (for Chain): Roller Chain
Trademark: DCC
Specification: ISO, SGS
Origin: Changzhou, Jiangsu, China
HS Code: 731589
Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength.As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components.
Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles.
Chain No. |
Pitch P (mm) | Diameter of roller d1 (mm) | Diameter of pin d2 (mm) | Length of pin b2 (mm) | Inner width of inner link b1(min) (mm) | Thickness of sidebar T (mm) | Height of sidebar h2 (mm) | Height of attached plate h2 (mm) | Tensile strength Q (min.)(KN) |
NE model lifting chain for elevators | |||||||||
NE15-101.6 | 101.6 | 26.5 | 11.5 | 70 | 27 | 6 | 35 | 35 | 128.1 |
NE30-152.4 | 152.4 | 35 | 15.5 | 90 | 36.5 | 8 | 50 | 50 | 245 |
NE50-152.4 | 152.4 | 35 | 15.5 | 90 | 36.5 | 8 | 50 | 110 | 245 |
NE100-200 | 200 | 42 | 19.1 | 120 | 51.8 | 10 | 60 | 125 | 375 |
NE150-200 | 200 | 48.5 | 22.23 | 120 | 57.8 | 10 | 60 | 125 | 375 |
NE300-250 | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 450 |
NE300-250A | 250 | 63.5 | 31.75 | 146 | 67.4 | 12 | 90 | 150 | 450 |
NP152.4 | 152.4 | 357 | 15.88 | 88 | 38 | 7.9 | 45 | 105 | 245 |
FE12600 | 152.4 | 35 | 15.88 | 86 | 36.5 | 7.9 | 45 | 120 | 245 |
NE100/2L | 200 | 44.5 | 19.05 | 114 | 53 | 10 | 60 | 125 | 400 |
NE150-B/2L | 200 | 44.5 | 19.05 | 114 | 53 | 10 | 60 | 125 | 400 |
NE200/2L | 250 | 63.5 | 31.75 | 140 | 67.4 | 12 | 90 | 150 | 750 |
9060 G4/4L | 152.4 | 34.93 | 19.05 | 94.5 | 38.1 | 9.5 | 50.8 | 120 | 312 |
P152.4-A/2L | 152.4 | 36 | 17.33 | 85 | 36.5 | 8 | 50 | 105 | 160 |
DK 19200M G4/2L | 200 | 38.1 | 15.77 | 86 | 36.5 | 8 | 45 | 125 | 312 |
NE150-A/2L | 200 | 48.5 | 22.23 | 122 | 57.6 | 10 | 75 | 125 | 529 |
P152.4 3L | 152.4 | 31.75 | 15.77 | 109 | 54 | 9.6 | 38.1 | 139.7 | 145 |
P125/2L | 125 | 52 | 17 | 80 | 31 | 8 | 580 | 100 | 219.52 |
FE12600-S/2L | 152.4 | 34.93 | 15.88 | 86 | 36.5 | 7.9 | 45 | 120 | 160 |
NE150/2L | 200 | 48.5 | 22.23 | 118 | 57.6 | 10 | 75 | 125 | 529 |
NE300-250/2L | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 1107 |
P152.4/2L | 152.4 | 35.7 | 15.88 | 88 | 38 | 7.9 | 45 | 105 | 160 |
DS17200-S G4/2L | 200 | 40.08 | 19.05 | 106.5 | 50.8 | 9.5 | 50.8 | 130 | 260 |
P250-G4/2L | 250 | 73 | 38.5 | 183.5 | 82 | 16 | 115 | 180 | 1200 |
NE300 | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 1107 |
Dimensions of attached plate | |||
Chain No. | d4 (mm) | L1 (mm) | L2 (mm) |
NE15-101.6 | 10 | 50 | 50 |
NE30-152.4 | 15 | 75 | 70 |
NE50-152.4 | 15 | 75 | 70 |
NE100-200 | 15 | 75 | 70 |
NE150-200 | 18 | 100 | 80 |
NE300-250 | 18 | 140 | 100 |
NE300-250A | 20 | 140 | 100 |
NP152.4 | 15 | 75 | 70 |
FE12600 | 15 | 75 | 70 |
Why Choose DCC?
1.Changzhou Dongwu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,
2.we occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and test devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southeast Asia ,and so on,
5.12years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the cost and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
If you need more information about this chain,please send email to us any time ,
Wiish we will promote business as well as friendship!
 Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength.
As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components.
Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles.
Chain No. |
Pitch P (mm) | Diameter of roller d1 (mm) | Diameter of pin d2 (mm) | Length of pin b2 (mm) | Inner width of inner link b1(min) (mm) | Thickness of sidebar T (mm) | Height of sidebar h2 (mm) | Height of attached plate h2 (mm) | Tensile strength Q (min.)(KN) |
NE model lifting chain for elevators | |||||||||
NE15-101.6 | 101.6 | 26.5 | 11.5 | 70 | 27 | 6 | 35 | 35 | 128.1 |
NE30-152.4 | 152.4 | 35 | 15.5 | 90 | 36.5 | 8 | 50 | 50 | 245 |
NE50-152.4 | 152.4 | 35 | 15.5 | 90 | 36.5 | 8 | 50 | 110 | 245 |
NE100-200 | 200 | 42 | 19.1 | 120 | 51.8 | 10 | 60 | 125 | 375 |
NE150-200 | 200 | 48.5 | 22.23 | 120 | 57.8 | 10 | 60 | 125 | 375 |
NE300-250 | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 450 |
NE300-250A | 250 | 63.5 | 31.75 | 146 | 67.4 | 12 | 90 | 150 | 450 |
NP152.4 | 152.4 | 357 | 15.88 | 88 | 38 | 7.9 | 45 | 105 | 245 |
FE12600 | 152.4 | 35 | 15.88 | 86 | 36.5 | 7.9 | 45 | 120 | 245 |
NE100/2L | 200 | 44.5 | 19.05 | 114 | 53 | 10 | 60 | 125 | 400 |
NE150-B/2L | 200 | 44.5 | 19.05 | 114 | 53 | 10 | 60 | 125 | 400 |
NE200/2L | 250 | 63.5 | 31.75 | 140 | 67.4 | 12 | 90 | 150 | 750 |
9060 G4/4L | 152.4 | 34.93 | 19.05 | 94.5 | 38.1 | 9.5 | 50.8 | 120 | 312 |
P152.4-A/2L | 152.4 | 36 | 17.33 | 85 | 36.5 | 8 | 50 | 105 | 160 |
DK 19200M G4/2L | 200 | 38.1 | 15.77 | 86 | 36.5 | 8 | 45 | 125 | 312 |
NE150-A/2L | 200 | 48.5 | 22.23 | 122 | 57.6 | 10 | 75 | 125 | 529 |
P152.4 3L | 152.4 | 31.75 | 15.77 | 109 | 54 | 9.6 | 38.1 | 139.7 | 145 |
P125/2L | 125 | 52 | 17 | 80 | 31 | 8 | 580 | 100 | 219.52 |
FE12600-S/2L | 152.4 | 34.93 | 15.88 | 86 | 36.5 | 7.9 | 45 | 120 | 160 |
NE150/2L | 200 | 48.5 | 22.23 | 118 | 57.6 | 10 | 75 | 125 | 529 |
NE300-250/2L | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 1107 |
P152.4/2L | 152.4 | 35.7 | 15.88 | 88 | 38 | 7.9 | 45 | 105 | 160 |
DS17200-S G4/2L | 200 | 40.08 | 19.05 | 106.5 | 50.8 | 9.5 | 50.8 | 130 | 260 |
P250-G4/2L | 250 | 73 | 38.5 | 183.5 | 82 | 16 | 115 | 180 | 1200 |
NE300 | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 1107 |
Dimensions of attached plate | |||
Chain No. | d4 (mm) | L1 (mm) | L2 (mm) |
NE15-101.6 | 10 | 50 | 50 |
NE30-152.4 | 15 | 75 | 70 |
NE50-152.4 | 15 | 75 | 70 |
NE100-200 | 15 | 75 | 70 |
NE150-200 | 18 | 100 | 80 |
NE300-250 | 18 | 140 | 100 |
NE300-250A | 20 | 140 | 100 |
NP152.4 | 15 | 75 | 70 |
FE12600 | 15 | 75 | 70 |
Why Choose DCC?
1.Changzhou Dongwu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,
2.we occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and test devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southeast Asia ,and so on,
5.12years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the cost and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
If you need more information about this chain,please send email to us any time ,
Wiish we will promote business as well as friendship!
Â
LeMan(Suzhou) Polymer Technology Co.,Ltd , https://www.lemanpolymer.com