Model NO.: tig200p
Name: Aluminum Welding Machine
Mosfet: 20PCS
Diodes: 20PCS
Trademark: As require
Transport Package: Carton
Specification: 498x328x302mm
Origin: Shenzhen China
HS Code: 85153900
Model NO.: tig200p
Name: Aluminum Welding Machine
Mosfet: 20PCS
Diodes: 20PCS
Trademark: As require
Transport Package: Carton
Specification: 498x328x302mm
Origin: Shenzhen China
HS Code: 85153900
ACDC tig aluminum welding machine product Characteristics:*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc.Â
| Model: | AC/DC TIG-200P |
| Input power voltage frequency(V,Hz): | AC220(single phase)±15%,50/60 |
| Rated input power capacity(KVA): | 4.5 |
| No-load voltage(V): | 56 |
| Output current range.(A):  | 20-200 |
| Rated output voltage(V): | 18 |
| Duty cycle (%)(25ºC): | 60 |
| No-load loss(W): | 40 |
| Arc-starting: | HFÂ |
| Efficiency(%):Â | 85 |
| Power factor (COSφ): | 0.93 |
| Insulation class: | F |
| Weight(KG): | 20 |
| Overall dimension(mm): | 498×328×302 |
| Case protection degree: | IP21S |
| Pre-flow time(s): | 0-2 |
| Duty ratio(%):  | 20-8 |
| Current down-slope time(s): | 0-5 |
| Post-flow time(s): | 2-10 |
| Remote interface: | without |
| AC welding thickness(mm):     | 0.5-5 |
 ACDC tig aluminum welding machine product Characteristics:
*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc.Â
| Model: | AC/DC TIG-200P |
| Input power voltage frequency(V,Hz): | AC220(single phase)±15%,50/60 |
| Rated input power capacity(KVA): | 4.5 |
| No-load voltage(V): | 56 |
| Output current range.(A):  | 20-200 |
| Rated output voltage(V): | 18 |
| Duty cycle (%)(25ºC): | 60 |
| No-load loss(W): | 40 |
| Arc-starting: | HFÂ |
| Efficiency(%):Â | 85 |
| Power factor (COSφ): | 0.93 |
| Insulation class: | F |
| Weight(KG): | 20 |
| Overall dimension(mm): | 498×328×302 |
| Case protection degree: | IP21S |
| Pre-flow time(s): | 0-2 |
| Duty ratio(%):  | 20-8 |
| Current down-slope time(s): | 0-5 |
| Post-flow time(s): | 2-10 |
| Remote interface: | without |
| AC welding thickness(mm):     | 0.5-5 |
Â
With a CCMC rotary strainer installed ahead of your process equipment, you can rest assure knowing that your process is protected against contamination, and your process equipment is protected against plugage excessive wear, or failure due to contamination. Our improved design allows for consistent operation and minimal maintenance.
Applications
Primary Clarifier, MST, Gluten Thickener Centrifuge Feed Stream
Wash Water Supply
Gluten Filter Shower Water
Rotory Strainer,Stainless Steel Rotory Strainer,Rotory Strainer In Milling Industry,Wet Milling Rotory Strainer
Changchun Meichen Machinery Co., Ltd. , https://www.meichenmachinery.com