1.Model: 2-tube machine, 4-tube machine;
2.Production Progress: 6times / minute
3.Copper Tube Specification: Free Choice from O.D.4.76 ~ O.D.19.05mm
Purpose:
   Tube Cutting Machine is used to open, straighten and chipless
   cut the coil copper pipe into set-length straight pipes It
   is mainly applied in the areas of air-condition, water
   heater, airplane, automobile, etc.
Main Technical parameters of Straightening and Cutting Machine:
1.Straightening and Cutting Machine is consist of Main Body,Motor Driven Uncoiler and Collecting Stack.
2.Tubing specification:Out Diameter of Copper,thickness as customer's requirement length from:as required.
3.Driven by servo-motor,touch screen input for cut length,quality and so on.
4.Copper tube or aluminum tube should be dead soft.
Straightening and Cutting Machine Structure Features:
Structure:Feeding from coil stand,straighten by aligned rollers which located in vertical and horizontal planes respectively.Cut by outside blade and pull apart.All action of feeding,straightening,length cut,pull apart and reset will be automatically.
Straightening and Cutting Machine Feeding Device:2 tubes from Eye to sky payoff.
Straightening and Cutting Machine Straightening Device:Straightening by vertical add horizontal planes respectively which roundness of tube will be obtained.
Straightening and Cutting Machine Feeding Device:Driven by servo-motor,one meter per feeding,multi-feeding is needed when longer than one meters,desired length setting will be valid through touch screen input.
Straightening and Cutting Machine Cut Blade:outside round cutting and pull apart without burr and span,Min length of tubing is 60mm.
Â
Straightening and Cutting Machine Main Components:
a.Control system will be MITSUBISHI PLC & Servo-Motor,OMRON touch screen,hard guard system.
b.Pneumatic parts will be SMC products.
c.Hydraulic parts will be Yuken products Electric parts(Limit switch,Switch,Main switch,Connector,Relay and so on)will be high quality product with Schneider. Straightening & Cutting Machine
1.Model: 2-tube machine, 4-tube machine;
2.Production Progress: 6times / minute
3.Copper Tube Specification: Free Choice from O.D.4.76 ~ O.D.19.05mm
Purpose:
   Tube Cutting Machine is used to open, straighten and chipless
   cut the coil copper pipe into set-length straight pipes It
   is mainly applied in the areas of air-condition, water
   heater, airplane, automobile, etc.
Main Technical parameters of Straightening and Cutting Machine:
1.Straightening and Cutting Machine is consist of Main Body,Motor Driven Uncoiler and Collecting Stack.
2.Tubing specification:Out Diameter of Copper,thickness as customer's requirement length from:as required.
3.Driven by servo-motor,touch screen input for cut length,quality and so on.
4.Copper tube or aluminum tube should be dead soft.
Straightening and Cutting Machine Structure Features:
Structure:Feeding from coil stand,straighten by aligned rollers which located in vertical and horizontal planes respectively.Cut by outside blade and pull apart.All action of feeding,straightening,length cut,pull apart and reset will be automatically.
Straightening and Cutting Machine Feeding Device:2 tubes from Eye to sky payoff.
Straightening and Cutting Machine Straightening Device:Straightening by vertical add horizontal planes respectively which roundness of tube will be obtained.
Straightening and Cutting Machine Feeding Device:Driven by servo-motor,one meter per feeding,multi-feeding is needed when longer than one meters,desired length setting will be valid through touch screen input.
Straightening and Cutting Machine Cut Blade:outside round cutting and pull apart without burr and span,Min length of tubing is 60mm.
Â
Straightening and Cutting Machine Main Components:
a.Control system will be MITSUBISHI PLC & Servo-Motor,OMRON touch screen,hard guard system.
b.Pneumatic parts will be SMC products.
c.Hydraulic parts will be Yuken products Electric parts(Limit switch,Switch,Main switch,Connector,Relay and so on)will be high quality product with Schneider.
HONYPLAS®Polysulfone (PSU) is a rigid, high-strength, semi-tough, transparent plastic, with high temperature resistance and hydrolytic stability better than polycarbonate. It maintains good mechanical properties under steaming and other disinfection environments.
HONYPLAS® polysulfone (PSU) performs well in many fluid handling applications and has successfully replaced brass in pressurized hot water environments. Creep is low under high temperature continuous load conditions, and it can withstand continuous contact with chlorinated hot water.
Features
High strength and rigidity
High impact strength (the same at lower temperatures)
Excellent dimensional stability
Good chemical resistance
Strong resistance to β, γ, X and infrared radiation
High microwave permeability
Self-extinguishing
Good antibacterial
Medium stress crack resistance
Poor weather resistance
Application
Microwave oven parts
Hair dryer
Humidifier
Food industry
Pump wheel
Insulator
Medical industry
Polysulfone Psu Sheet Rod,Psu Material Plastic Plate,Polysulfone Psu Plastic Sheet,Psu Sheet Rod
Hony Engineering Plastics Co.,Ltd. , https://www.honyplastic.com