Director of National Development and Reform Commission: Zhang Ping
Minister of Commerce: Chen Deming
December 24, 2011
Annex: "Guidance Catalogue for Foreign Investment Industries (Revised in 2011)"
The fourth part (22) of the document stipulates that in the field of instrumentation and instrumentation the State Council encourages foreign investment, the details are as follows:
(22) Instruments, Meters, and Culture and Office Machinery Manufacturing
1. Industrial process automation system and device manufacturing: Fieldbus control system, metal tube float flowmeter, turbine flowmeter, vortex flowmeter, large programmable controller (PLC), two-phase flowmeter, solid flowmeter, new sensors and Field measuring instrument
2. Development and manufacture of large-scale precision instruments: electron microscope, laser scanning microscope, scanning tunneling microscope, electron probe, large-scale metallurgical microscope, photoelectric direct-reading spectrometer, Raman spectrometer, mass spectrometer, chromatography-mass spectrometer, nuclear magnetic resonance spectrometer , EDS, X-ray fluorescence spectrometer, diffractometer, industrial CT, 450KV industrial X-ray flaw detector, large dynamic balance testing machine, online mechanical automatic detection system, three coordinate measuring machine, laser ratio measuring instrument, electrical prospecting Instrument, aeronautical and gamma spectrometry instruments over 500m, well gravity and three-component magnetometers, high-precision microgalactic gravity and aviation gravity gradient measuring instruments, scales, encoders
3. High-precision digital voltmeter, ammeter manufacturing (display range more than seven and a half)
4. Reactive power automatic compensation device manufacturing
5. Safety production of new equipment and equipment manufacturing
6. Coal mine downhole monitoring and disaster forecasting system, coal safety inspection integrated management system development and manufacturing
7. VXI bus type automatic test system (according to IEEE1155 international specification) manufacturing
8. Engineering surveying and geophysical observation equipment manufacturing: Digital triangulation system, 3D terrain model CNC forming system (area> 1000 × 1000mm, horizontal error <1mm, elevation error <0.5mm), ultra-wideband seismometer (φ <5cm, frequency band 0.01-50Hz, Equivalent Dynamic Speed ​​Noise <10-9m/s), Seismic Data Set Processing System, Integrated Downhole Seismic and Precursor Observation System, Precision Vibroseis System, Engineering Acceleration Measurement System, Precision GPS Receiver (Accuracy 1mm1ppm), INSAR image receiving and processing system, INSAR image receiving and processing system, absolute gravimeter with accuracy <1 gamma, satellite gravimeter, Doppler weather radar with coherent or dual polarization technology, visibility meter, meteorological sensor (temperature, pressure, humidity, wind, precipitation, cloud, visibility, radiation, frozen soil, snow depth), lightning protection system, multi-level dust sampling meter, 3-D ultrasonic anemometer, high-precision intelligent total station, 3D Laser scanners, high-performance diamond drills for drilling, non-cooperative target laser rangefinders, wind profilers (with RASS), GPS electronic sounder systems, CO 2/H2O flux observation system, boundary layer Doppler lidar, particle particle spectrum instrument (3nm-20μm), high performance data collector, underwater glider
9. Environmental monitoring equipment manufacturing: SO2 automatic sampler and analyzer, NOX and NO2 automatic sampler and analyzer, O3 automatic monitor, CO automatic monitor, smoke and PM2.5 dust sampler and sampling cutter, portable toxic and harmful Gas analyzer, automatic organic pollutant analyzer in air, COD automatic online monitor, BOD automatic online monitor, online turbidity monitor, DO online monitor, TOC online monitor, ammonia nitrogen online monitor, radiation dose detector , ray analysis tester, heavy metal online monitoring equipment, online bio-toxicity water quality early warning monitoring equipment
10. Hydrological data acquisition, processing and transmission, and flood warning equipment and equipment manufacturing
11. Marine exploration monitoring equipment and equipment manufacturing: underwater and underwater cameras and underwater cameras, multi-beam detectors, medium-to-deep stratigraphic profile detectors, walking-type deep salt and temperature probes, magnetic flux gate compasses, hydraulic winches, underwater seals Electronic connector, efficiency >90% reverse osmosis desalination energy recovery device, marine ecosystem monitoring buoy, profile detection buoy, single-use conductivity temperature and depth measurement instrument (XCTD), on-site water quality measurement instrument, intelligent Marine water quality monitoring chemical sensors (continuous 3 to 6 months), electromagnetic current meter, acoustic Doppler current profiler (self-contained, direct-reading, and marine), conductivity temperature depth profiler, acoustic response release Equipment, ocean deep sea tide measurement system (laying the seabed)
The development of the instrumentation industry in the past few years is obvious to all. With the support of the government, the instrumentation industry will certainly develop even better.
The manipulator is the core of the automatic welding manchinery which is composed of kinds of welding rectifier, hanging welding head, Welding Turning Rolls, Welding Positioner, welding fluid feed-in and recovery system and so on. It is a whole set of welding equipment that can be used for metal pressuer vessel and metal machinery. The autoization welding machinery is widely used in pressure vessel, refrigeration plant, power plant, wind tower generating equipment, aviation, metallurgy industry, engineering plant, watercraft manufacture, roller resurfacing welding, petrochemical industry and so on.
CZ22-7×7 Complete Equipment of Spherical Head Welding Center
Spherical automatic welding plane is a cross welding machine, a set of ESAB wire submerged arc welding system, a set of ESAB with submerged arc welding system, a set of double column welding positioner.
Spherical welding center equipment mainly by the operating machine, ESAB welding system; TV monitoring system; flux feed recovery system, electrical control system, up and down tracking system, with a very surfacing institutions, water cooling system and other components.
The main technical parameters
Name |
Details parameters |
|
1 |
Power supply |
|
2 |
Vertical load |
MAX 50t |
3 |
The workpiece weighs 50 tons and supports the diameter 1600mm-6000mm |
When the working conditions for the horizontal position forward 90 °, in the 50 tons load, the workpiece center of gravity from the position of the machine table plane distance of up to 1000mm |
4 |
Artifacts eccentricity |
In the 50 tons load, the workpiece center of gravity from the position of the machine table axis up to 300mm |
5 |
Spinning speed |
0,015 – 0.25 rpm |
6 |
Rotation rate change rate |
≤5% |
7 |
Flip speed |
0,01-0,15rpm |
8 |
±180°(double-seater) |
|
9 |
Worktable diameter |
Ф 6000mm |
10 |
The workbench to adjust height |
600mm |
11 |
Maximum welding current |
3000A |
12 |
Maximum preheat temperature |
400℃ |
13 |
≥ 24h |
We can provide the whole set welding manchinery for worldwide customers with high quality and good service, which is designed, manufactured, installed by ourselves.
Welding Machinery,Saw Welding Machine,Automatic Welding Machine,Machinery For Welding Metal
SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachines.com