Spray Drying Machine for Plastic Resin

WORKING PRINCIPLE
Filtered and heated air goes into air distributor on the top of the dryer, and spirals into drying room uniformly. Going through the high-speed centrifugal atomizer on the top of tower, the liquid (rotates) sprays into extremely fine mist liquid beads, and can be dried completely in a short time in co-current contact with hot air. Finished products exhaust continuously from the bottom of the drying tower and cyclone separator, while waste gases are vented by the fan. 

FEATURES
1. Fast drying speed; greatly increasing the surface area of the material after the liquid is atomized; it can instantly evaporate 95% -98% of water in the stream of hot air; it takes only a few seconds to complete drying, which is especially suitable for drying heat sensitive materials. 
2. Our products have a good uniformity, mobility and solubility, high purity and good quality.
3. Simplified production process, easy to operate and control. Liquid of 40-60% moisture content (up to 90% for special materials) can be dried into powder products at a time, without crushing and screening after drying, which reduces production process and improve product purity. The size, bulk density, moisture can be adjusted within a certain range by changing operation conditions. It is convenient to do control and management. 

APPLICATION
Chemical industry: sodium fluoride (potassium), alkaline dyestuff and pigment, dyestuff intermediate, compound fertilizer, formaldehyde silicic acid, catalyst, sulphuric acid agent, amino acid, white carbon black, etc.
Plastic resin: AB, ABS latex, urea resin, phenolic resin, dense glue (urea) formaldehyde resins, polyethylene, polyvinyl chloride, etc.
Food industry: fat-rich milk powder, lancet protein, cocoa milk powder, babymeal, hunting blood meal, egg white (yellow), etc.
Food and plants: oats, chicken juice, coffee, instant tea, seasoning meat, protein, soybean, peanut protein, hydrolyzate and so on.
Sugar: corn syrup, corn starch, glucose, pectin, malt sugar, potassium sorbate, etc.
Ceramics: aluminium oxide, ceramic tile material, magnesium oxide, talcum powder, etc.

DETAILS


SCHEMATIC DIAGRAM


TECHNICAL PARAMETERS Note: the amount of water evaporation depends on the factors of material characteristics, inlet and outlet temperature. Water evaporation curve is shown above (for reference of selection) when the outlet temperature is 90ºC. With the constantly updated, relevant parameters will change without prior notice.
 
ORDERING INFORMATION
1,Name and physical properties of liquids; Solid content (or water content), viscosity, surface tension, PH value.
2,After drying, the maximum value of powder capacity, residual water content, particle size and temperature.
3,Volume of production, opening times of the day.
4,Available energy: steam pressure availability, electric capacity, coal, oil and gas availability.
5,Control requirement: whether you need to self-control inlet and outlet temperatures.
6,Powder collecting requirements: whether you need to install a pouched trapper.
7,Environmental requirements for exhaust emissions.
8,Other special requirements.

COMPANY SHOW


CERITIFICATES



SERVICES
pre-sale service
We Invite customers to visit our company and communicate on technical requirements face to face.
sale service
Responsible for debugging the equipment according to customers' requirements of various technical data. Our engineers will train our customers about equipment features and operation key points to make sure the equipment running in the best condition.
after-sale service
We provide installation, debugging, maintenance, training and other services; Provide relevant technical data, equipment, software and related GMP certification materials;Set up after-sales service hotline, and arrange personnel to visit customers every year to know more customer needs,like customer operation problems in the process of production equipment.
quality promise
Our company promises strictly operate the ISO9001 quality system certification standards and pharmaceutical equipment GMP audit requirements,promise we provide new equipment. Advanced technology,good quality.Equipment operation safe reliable, affordable, easy to maintain.
 
Equipment warranty period is one year,all the parts for the equipment choose well-known brand.
During the warranty when equipment have problem in quality like equipment failure and damage, our company offer free maintenance or replacement.

 

Mid Motor

The central motor we are referring to here is a central Ebike Motor used on lithium-ion assisted Electric Bicycles, while the common one is the motor used on lithium-ion mountain assisted bicycles. It was developed and put into use after the hub motor, and compared to the hub motor, the technology of the central motor is not yet very mature, so there is still a long way to go in terms of performance stability. But the central motor has a characteristic that hub motors do not have, which is its instantaneous starting assistance function, so it also has a corresponding market. The most common method is to install a center mounted motor on a mountain Electric Bike to meet the bumpy road conditions in the mountains, so both hub motors and center mounted motors have their advantages and disadvantages. The choice of motor depends entirely on which aspect of its functionality you value.Generally speaking, the central motor is used to assist mountain bikes, and hub motors are more common on urban series of assist bicycles.

Electric Bicycle Motor ,Mid Motor,Ebike Motor

Ejoysport Technology (SuZhou)Co.,LTD , https://www.ejoysportbike.com