Model NO.: PE and aluminium pipe making extruder
Condition: New
Color: Blue and Grey
Voltage: Can Be Customed According to Request
Material: Pex Aluminium
Pipe Size: 16-32mm
Operation Direction: From Right to Left
Center Height: 1000mm
Cooling Water: 5 M3/H
Water Pool Volume: 10 M3
Power Supply: 3 Phase 380V 50Hz
Total Power: 130 Kw
Trademark: XR
Transport Package: Be Packaged by Plastic Film
Specification: 40000*1800*2000
Origin: China
HS Code: 8477200000
Model NO.: PE and aluminium pipe making extruder
Condition: New
Color: Blue and Grey
Voltage: Can Be Customed According to Request
Material: Pex Aluminium
Pipe Size: 16-32mm
Operation Direction: From Right to Left
Center Height: 1000mm
Cooling Water: 5 M3/H
Water Pool Volume: 10 M3
Power Supply: 3 Phase 380V 50Hz
Total Power: 130 Kw
Trademark: XR
Transport Package: Be Packaged by Plastic Film
Specification: 40000*1800*2000
Origin: China
HS Code: 8477200000
PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder
 
The PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder is professional make the metal and plastic pipes. The metal is aluminium, the plastic material can be PE, PVC,and other plastic material. The aluminium metal can Aluminum material can improve the support performance of the pipe while Plastic materials can improve the corrosion resistance of pipes.

Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder

PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder is including below parts:
1.Aluminum foil unwinding machine   2.Aluminum foil storage device (with ultrasonic welding connector)   3.Aluminum pipe forming system   4.Ultrasonic welding machine   5.Single screw extruder, model SJ60×30 (inner layer PEX)   6.Single screw extruder, model SJ45×25 (inner and outer layer glue)   7.Extrusion die head   8.Single screw extruder, model SJ60×30 (outer layer PEX)   9.Cooling tank (with auto air sealing system for pipe)   10.Belt haul-off unit   11.Double station coiler
Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder
Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder

SUMMARY
l Material:                      PEX, Aluminum (overlap welding)
l Pipe size range:               Ø16-32mm
l Operating direction:           from right to left
l Center height:                 1000 mm
l Machine color:                 Jiangsu XinRong standard color (white)
l Cooling water consumption:     5 m3/h  ( ≤20ºC,≥0.3MPa )
l Water pool volume:            10 m3
l Compressed air consumption:   0.3 m3/min ( >0.5MPa )
l Power supply:                 3 phase 380V( ±10% )  50Hz
l Total power:                   130 KW
l Actual power when operating:  ≈85 KW
l Overall dimension:             28000×3000×2500 mm
l Control system                  
Adopt German Siemens 10" inch human-machine interface, liquid crystal displayer, new generation programmable micro-computer control system, all operating parameters can define and show on the screen, and can setup and revise rotation speed, traction speed, melting temperature and each zone temperature.
• DC speed regulator          Eurotherm  U.K
• Inverter:                  ABB or BOSCH-REXROTH
• Low-voltage electrical parts    
                Button, switch              Schneider, France
                Contactor                  Schneider, France
                Air switch                  Schneider, France
                Intermediate relay           Schneider, France
                Temperature controller       RKC, Japan
                Heater                     Magal ceramic heater
l Circumstance:
         Working place:               indoors
         Power supply:               no dangerous area
         Temperature:                0-40ºC
         Humidity:                    85% no condensation

Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder

Technical parameter
• Screw ,barrel:                38CrMoAlA,nitriding, polishing,             depth of nitriding 0.45-0.65 mm,             surface hardness HV800-900;                                                                                                          
• Sensor model:                PT131B ,50Mpa; power source 24V, output
                               0-10V.
• Screw diameter:              Ø60 mm
• L/D :                        30 :1 
• Driving motor:             22KW (AC motor )
• AC inverter:                    ABB or BOSCH-REXROTH
• Capacity Max:           ≈ 50kg/h (PEX material, vary with different           materials and pipe size)
• Reduction gear box:           high torque, low noise, hard face special
                                     reduction gearbox for extruder
• Lubrication system:        circulating oil enforced by oil pump, 
                                infiltration and splash in oil basin
• Heating power:               20KW
• Cooling power:               4×0.18KW enforced air cooling

Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder
This is the aluminium roll forming unit.
Features:
To flatten, guide aluminum foil to form aluminum pipe.
Technical parameter             
• Number of forming wheel:     Ø16, 20, 25, 32mm  4 sets
• Aluminum alloy frame, nylon and copper wheel
PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder
 
The PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder is professional make the metal and plastic pipes. The metal is aluminium, the plastic material can be PE, PVC,and other plastic material. The aluminium metal can Aluminum material can improve the support performance of the pipe while Plastic materials can improve the corrosion resistance of pipes.

Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder

PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder is including below parts:
1.Aluminum foil unwinding machine   2.Aluminum foil storage device (with ultrasonic welding connector)   3.Aluminum pipe forming system   4.Ultrasonic welding machine   5.Single screw extruder, model SJ60×30 (inner layer PEX)   6.Single screw extruder, model SJ45×25 (inner and outer layer glue)   7.Extrusion die head   8.Single screw extruder, model SJ60×30 (outer layer PEX)   9.Cooling tank (with auto air sealing system for pipe)   10.Belt haul-off unit   11.Double station coiler
Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder
Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder

SUMMARY
l Material:                      PEX, Aluminum (overlap welding)
l Pipe size range:               Ø16-32mm
l Operating direction:           from right to left
l Center height:                 1000 mm
l Machine color:                 Jiangsu XinRong standard color (white)
l Cooling water consumption:     5 m3/h  ( ≤20ºC,≥0.3MPa )
l Water pool volume:            10 m3
l Compressed air consumption:   0.3 m3/min ( >0.5MPa )
l Power supply:                 3 phase 380V( ±10% )  50Hz
l Total power:                   130 KW
l Actual power when operating:  ≈85 KW
l Overall dimension:             28000×3000×2500 mm
l Control system                  
Adopt German Siemens 10" inch human-machine interface, liquid crystal displayer, new generation programmable micro-computer control system, all operating parameters can define and show on the screen, and can setup and revise rotation speed, traction speed, melting temperature and each zone temperature.
• DC speed regulator          Eurotherm  U.K
• Inverter:                  ABB or BOSCH-REXROTH
• Low-voltage electrical parts    
                Button, switch              Schneider, France
                Contactor                  Schneider, France
                Air switch                  Schneider, France
                Intermediate relay           Schneider, France
                Temperature controller       RKC, Japan
                Heater                     Magal ceramic heater
l Circumstance:
         Working place:               indoors
         Power supply:               no dangerous area
         Temperature:                0-40ºC
         Humidity:                    85% no condensation

Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder

Technical parameter
• Screw ,barrel:                38CrMoAlA,nitriding, polishing,             depth of nitriding 0.45-0.65 mm,             surface hardness HV800-900;                                                                                                          
• Sensor model:                PT131B ,50Mpa; power source 24V, output
                               0-10V.
• Screw diameter:              Ø60 mm
• L/D :                        30 :1 
• Driving motor:             22KW (AC motor )
• AC inverter:                    ABB or BOSCH-REXROTH
• Capacity Max:           ≈ 50kg/h (PEX material, vary with different           materials and pipe size)
• Reduction gear box:           high torque, low noise, hard face special
                                     reduction gearbox for extruder
• Lubrication system:        circulating oil enforced by oil pump, 
                                infiltration and splash in oil basin
• Heating power:               20KW
• Cooling power:               4×0.18KW enforced air cooling

Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder
This is the aluminium roll forming unit.
Features:
To flatten, guide aluminum foil to form aluminum pipe.
Technical parameter             
• Number of forming wheel:     Ø16, 20, 25, 32mm  4 sets
• Aluminum alloy frame, nylon and copper wheel

Cnc Router With CCD


CCD Cnc Router with Visual system with Camera for Sign Board Cutting, Print image edge cutting, Versio.

Introduction:
1) Cnc Router With Ccd Vision Router System is among the most versatile CNC machining systems you will find on the market. The T-slot bed makes it very easy to place the sheet stock down for cutting and routing, and even setup custom jigs, fixtures and clamps for parts marking applications.
2) It can produce accurate, repeatable, cost-effective work in considerably less time than it takes to do t he same work by hand. Featuring our state-of-the-art Vision Controller and our graphically advanced Vision software, this machine is perfect for a wide variety of applications including milling, drilling, contouring, and routing.

3) Application for Routing out wood signs, Cutout letters, Control panels, Cutting out sheets of material and 3D signs in sign foam, wood and more!


Cnc Router with CCD camera for decoration Camera
The machine comes with a camera to realize the Vision function.
Cnc Router Machine's spindle  High Frequency Powerful spindle
The High quality UTECH R2 series Cnc Router Machine comes standard with 3.5kw high frequency spindle. This precision spindle requires no maintenance. Fully programmable speeds from 6000 to 24000 RPM, more powerful and less noise.
stepper motor Drive Motors
Patent design 1:4 gear reducer install on the driving motor, makes the motor is more powerful, and having a longer time service life.
The stepper motors are installed on all axes to ensure precise positioning of the gantry and the spindle in accordance with a predetermined program at high speed. Stepper motors are well proven high degree of reliability.
The machine is installed 4 pieces of motors.
woodworking cnc router for wood MDF UTECH Patent pressing clamp
The patent design pressing clamp is convenient for the user to assemble and disassemble the material.
plastic cnc cutting machine with CCD camera XYZ ASK Square Guide Rail(German)+Flange slider
HIGH PRECISION LINEAR GUIDE RAIL HIGH RIGIDITY OF [ASK" (German)
Due to the increased stability and rigidity provide high precision movement of the gantryand high-speed drilling spindles in X, Y, Z. achieved high machining accuracy and durability of the machine without loss of accuracy parameters.
KT plate cnc router with visual positioning system Machine handpiece
The spindle is fixed on the high quality aviation aluminum T061/6063 plate, the plate is machined by high precision CNC machining center.
Cnc Router with helical gear XY Helical Rack Gear(Germany)
Unlike gears with straight teeth, oblique engages gradually, not immediately over the entire length. Helical gearing has no zone-pair gearing. In spur gear the load on the teeth is applied instantly. The teeth in helical gears are loaded gradually as you approach them in the area of gear meshing is always at least two pairs of teeth
wood cnc machine TBI High-Precision Ball-screw Transmission (Taiwan)
1. High transmission efficiency.
2. High transmission accuracy, smooth movement, no creep phenomenon. The ball screw drive is basically rolling friction, and the frictional resistance is small. The frictional resistance has almost no relation with the speed of movement.
3. There is no free travel in the reverse direction. After the ball screw and nut are pre-tightened, the axial clearance can be eliminated. In this way, there is no dead zone in the reverse direction, which can improve the axial transmission accuracy and axial stiffness.


plastic cnc router

Cnc Router with CCD

Cnc Router With Ccd,Cnc Engraving Router With Ccd,3D Cnc Router With Ccd,Cnc Router With Ccd Camera

Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com