Oil Parts High-Pressure Stand Pipe

Oil parts High-Pressure Stand Pipe

Meeting the high-pressure stand pipe Z23Y100-5000PSI and Z23Y50-5000PSI slurry valve, high pressure oil azelaic spherical, high-pressure cone by the Wang, tees, high pressure hose, elbow, pressure gauge, a short section and so on.
Ground valve group were goose shaped three structures, with a compact, fluid resistance small, can give full play to the characteristics of power.
Reducing drilling platform with four-way valve unit can be directly used for single tube, easy field use.
Wang pressure from the high-strength alloy steel and heat-treated. Structure for fast loading and unloading operations. Manufactured by special equipment by the Wang. By finishing in the sphere, cone with the ring to achieve sealing.
Z23Y-5000PSI mud gate valve and valve seat are used carbide spray, erosion resistant, corrosion-resistant characteristics, greatly enhance the life of the valve, and the operation torque is small, light switches and so on.
Manifold of the elbow, reducer, tee, and Stone and other high-strength alloy steel casting, proper thickening of the wall, and by the good treatment that can fully meet the requirements of strength and corrosion resistance.
Of high precision parts using special processing technology, to ensure manufacturing quality; On by the high parts in the assembly have to undergo a hydrostatic strength and sealing test, strict factory quality assurance.
Installation:
1, the installation, you should wash the face and the sealing ring groove Wang, apply grease to remove material pipe organs.
2, double-check all connections are on tight.
3, the removal of parts can be open, clean lines, occupies a bit after the grease coated bandage, to prevent dirt to enter and damage the screw thread and the sealing surface.
Use and maintenance of key points:
1, on a regular basis to the slurry of calcium-based grease filling valve, maintenance gate.
2, periodically check to see whether the connections and mounting bolts loose.
3, found that leakage of sealing parts, the seal should be replaced to prevent damage to the related metal parts.
4, maintaining the appearance manifold clean, anti-corrosion coating.


  Oil parts High-Pressure Stand Pipe

Meeting the high-pressure stand pipe Z23Y100-5000PSI and Z23Y50-5000PSI slurry valve, high pressure oil azelaic spherical, high-pressure cone by the Wang, tees, high pressure hose, elbow, pressure gauge, a short section and so on.
Ground valve group were goose shaped three structures, with a compact, fluid resistance small, can give full play to the characteristics of power.
Reducing drilling platform with four-way valve unit can be directly used for single tube, easy field use.
Wang pressure from the high-strength alloy steel and heat-treated. Structure for fast loading and unloading operations. Manufactured by special equipment by the Wang. By finishing in the sphere, cone with the ring to achieve sealing.
Z23Y-5000PSI mud gate valve and valve seat are used carbide spray, erosion resistant, corrosion-resistant characteristics, greatly enhance the life of the valve, and the operation torque is small, light switches and so on.
Manifold of the elbow, reducer, tee, and Stone and other high-strength alloy steel casting, proper thickening of the wall, and by the good treatment that can fully meet the requirements of strength and corrosion resistance.
Of high precision parts using special processing technology, to ensure manufacturing quality; On by the high parts in the assembly have to undergo a hydrostatic strength and sealing test, strict factory quality assurance.
Installation:
1, the installation, you should wash the face and the sealing ring groove Wang, apply grease to remove material pipe organs.
2, double-check all connections are on tight.
3, the removal of parts can be open, clean lines, occupies a bit after the grease coated bandage, to prevent dirt to enter and damage the screw thread and the sealing surface.
Use and maintenance of key points:
1, on a regular basis to the slurry of calcium-based grease filling valve, maintenance gate.
2, periodically check to see whether the connections and mounting bolts loose.
3, found that leakage of sealing parts, the seal should be replaced to prevent damage to the related metal parts.
4, maintaining the appearance manifold clean, anti-corrosion coating.


 

Steel Casting Parts

Steel Casting Parts,Accurate 3D Printer,3D Print Automotive,3D Print Engineering

Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzl-3dprint.com