Traditional trough mixers rely on S-shaped agitating paddles to mix at low speed to mix the powders. The uniformity of the blends of various drugs is poor. The content of granules produced is inaccurate and often results in a large number of reworks; the traditional swing The particle machine squeezes the mixed powder into strips and then cut into pellets by a cutter. Since the pellets are made of water chestnuts, the fluidity is poor, and there are partial stacking and bridging during feeding. The accuracy of feeding is poor, so there are problems with loose tablets, broken pieces, and different tablet weights.
Under the background of the rapid development of the pharmaceutical industry and the increase in market size, the mixed granulation equipment needs to be upgraded and transformed.
The wet granulator is a new type of granulation equipment available on the market for the development of wet granulate into the required granules, and it is also possible to crush the bulk dry material to the desired granules. Its main feature is the easy installation and removal of the screen, and it can also adjust the elasticity properly. The seven-corner drum is easy to disassemble and easy to clean. The mechanical transmission system is completely enclosed in the body and is accompanied by a lubrication system. The entire machine runs smoothly and is favored by the market.
Industry sources said that at present, companies basically imported from abroad, such as Germany, Glatt or GEA series of well-known granulation equipment for high-efficiency, high-quality production, domestic granulation mixer technology and quality are flawed, and the gap between foreign countries is very large, Therefore, there is a huge gap in the domestic equipment market and it is urgent to dig deeper.
Experts said that the performance of wet granulator mixers mainly depends on the sealing method and sealing effect of the cutter and agitator. The equipment with poor sealing effect can easily enter the dust. Even if it can be cleaned on line, it can easily cause water to enter the gear box. Affect the production use of equipment.
In addition, in terms of user-friendly design, the mixer granulator equipment manufacturer needs to design the gap between the paddle and the bottom of the pan during the production of the equipment to facilitate unloading and cleaning. At the same time, it is necessary to pay attention to the ease of disassembly of the blade and the cutter to ensure the disassembly of the blade and the cutter.
Experts also said that the wet selection must be based on the product to choose the production, to see the shape of the product to choose the shape of the blade, large shear force is good, but some herbs in the cream process if the use of a large shear force, Sticky pans may occur, making it difficult to sway.
Judging from the current development of the tablet industry, with frequent policies in the pharmaceutical sector and increasing market demand, the tablet industry is facing a promising development and is also facing a new round of structural adjustments, and technology for granulation and mixing equipment. Also urgently need to be upgraded. Products need to be replaced. In this refreshing atmosphere, how to make breakthroughs in the domestic granulation mixer equipment industry and challenge foreign import equipment is the key.
According to industry insiders, domestically-made mixed granulation equipment needs independent innovation, in-depth digestion, and development of businesses with a pragmatic attitude and enhanced competitiveness. For example, Jishou Zhongcheng Pharmaceutical Machinery Factory relies on forty years of experience in the production of pharmaceutical machinery equipment, and with strong scientific research strength and innovative spirit, to create a mixed granulation equipment suitable for the needs of the domestic pharmaceutical industry, constantly surpassing foreign advanced pharmaceutical machinery technology, To open up a new world for China's pharmaceutical equipment industry.
With the rapid development of automation and intelligence, the transformation speed of the granulation equipment industry will continue to accelerate, and pharmaceutical companies can only keep up with the pulse of the market and strengthen their learning, absorption and innovation, so as to ensure that equipment will not be eliminated in the market and occupy a place. .
Under the background of the rapid development of the pharmaceutical industry and the increase in market size, the mixed granulation equipment needs to be upgraded and transformed.
The wet granulator is a new type of granulation equipment available on the market for the development of wet granulate into the required granules, and it is also possible to crush the bulk dry material to the desired granules. Its main feature is the easy installation and removal of the screen, and it can also adjust the elasticity properly. The seven-corner drum is easy to disassemble and easy to clean. The mechanical transmission system is completely enclosed in the body and is accompanied by a lubrication system. The entire machine runs smoothly and is favored by the market.
Industry sources said that at present, companies basically imported from abroad, such as Germany, Glatt or GEA series of well-known granulation equipment for high-efficiency, high-quality production, domestic granulation mixer technology and quality are flawed, and the gap between foreign countries is very large, Therefore, there is a huge gap in the domestic equipment market and it is urgent to dig deeper.
Experts said that the performance of wet granulator mixers mainly depends on the sealing method and sealing effect of the cutter and agitator. The equipment with poor sealing effect can easily enter the dust. Even if it can be cleaned on line, it can easily cause water to enter the gear box. Affect the production use of equipment.
In addition, in terms of user-friendly design, the mixer granulator equipment manufacturer needs to design the gap between the paddle and the bottom of the pan during the production of the equipment to facilitate unloading and cleaning. At the same time, it is necessary to pay attention to the ease of disassembly of the blade and the cutter to ensure the disassembly of the blade and the cutter.
Experts also said that the wet selection must be based on the product to choose the production, to see the shape of the product to choose the shape of the blade, large shear force is good, but some herbs in the cream process if the use of a large shear force, Sticky pans may occur, making it difficult to sway.
Judging from the current development of the tablet industry, with frequent policies in the pharmaceutical sector and increasing market demand, the tablet industry is facing a promising development and is also facing a new round of structural adjustments, and technology for granulation and mixing equipment. Also urgently need to be upgraded. Products need to be replaced. In this refreshing atmosphere, how to make breakthroughs in the domestic granulation mixer equipment industry and challenge foreign import equipment is the key.
According to industry insiders, domestically-made mixed granulation equipment needs independent innovation, in-depth digestion, and development of businesses with a pragmatic attitude and enhanced competitiveness. For example, Jishou Zhongcheng Pharmaceutical Machinery Factory relies on forty years of experience in the production of pharmaceutical machinery equipment, and with strong scientific research strength and innovative spirit, to create a mixed granulation equipment suitable for the needs of the domestic pharmaceutical industry, constantly surpassing foreign advanced pharmaceutical machinery technology, To open up a new world for China's pharmaceutical equipment industry.
With the rapid development of automation and intelligence, the transformation speed of the granulation equipment industry will continue to accelerate, and pharmaceutical companies can only keep up with the pulse of the market and strengthen their learning, absorption and innovation, so as to ensure that equipment will not be eliminated in the market and occupy a place. .
Magnetic Exercise Bike,Magnetic Resistance Bike,Magnetic Stationary Bike,Magnetic Upright Exercise Bike
ZHEJIANG POWERTECH CO,.LTD , https://www.chinatattoo-supplies.com