Milk Chilling Vat / Milk Chilling Machine for Sale

• Model NO.: 0.5-12T
• Power Source: Electric
• Automatic Grade: Automatic
• Customized: Customized
• Volume: 0.5-12t
• Package: Plywood Case
• Trademark: HH
• Specification: 50-5000L
• HS Code: 1901900000

• Process: Frozen and Chilled
• Certification: CE
• Application: Milk, Yogurt
• Material: Stainless Steel
• Structure: Horizontal
• Product Name: Milk Chilling Machine
• Transport Package: Standard Wooden Case or Accord to Customer
• Origin: Zhejiang, China

Milk Chilling Vat / Milk Chiller for Sale

Brief Introduction:
It is an important corollary equipment of mechanized milking ranch; It's more suitable for the manual dispersed milking farms and milk collection station store fresh milk, dairy cooling set.

Characteristics
1. Rigid wall uses the advanced plate evaporator to directly refrigerate milk.
2. Refrigeration compressor uses imported French closed compressor set, equipped with the reliable midpoint defend device, will not burn motor out due to overload or system fault.
3. Pots are all adopt stainless steel SUS304 or SUS316, with automatic pressure cleaning and manual and automatic stirring device,
4. Insulation layer uses polyurethane foam with good insulation performance.

Material:
The milk chilling tank from Hangzhou Huihe Facture Co., Ltd usually uses SUS304 or SUS316L to make if the customer has no special requirements.

Note:
The technical parameter in the chart is standard, if you have any special needs, you can tell us in advance, and we will design according to your needs.


 

Their rollers and the outer wheels are arranged in a right angle intersecting intersecting. They can bear the load from all directions at the same time (such as axial, thrust or momentum hormones, etc.). Because of the linear contact between the roller and the track surface, the possibility of the axis to bear the load and the elastic deformation is very small. This type of bearing is widely used in industrial robots, working machines and medical facilities. It needs high rigidity, high speed and high speed to ensure precise occasions.

In cross roller bearings, cylindrical rollers are perpendicular to each other through spacer retainers on the top, so 1 cross roller bearings can bear all loads of radial load, axial load and torque load. Ring size is the minimum limit of miniaturization, especially very thin type is small size close to the limit, and has high rigidity, so the most suitable for use in industrial robot joint or rotating parts, machining center machine rotary table, hand rotating parts, precision rotary table, medical machine, metering device, IC manufacturing equipment etc.

1. Excellent rotation accuracy
The inner structure of the Cross Roller Bearing is arranged in 90 degrees perpendicular to each other by the roller.
The roller is equipped with a spacer or isolation block between the rollers to prevent the rolling of the rollers from being examined each other. In addition, the phenomenon of roller contact or locking will not occur. At the same time, because the inner and outer ring is a segmented structure, the clearance can be adjusted, even if the preload is applied, high accuracy rotation motion can also be achieved.
2. Simplification of operation and installation
The outer ring or inner ring, which is divided into 2 parts, is fixed together after loading the roller and the holder, so the operation is very simple.
3. Bear large axial and radial load
The roller is arranged vertically through the spacer retainer on a 90 degree V groove rolling surface.
4. Greatly save the installation space
The size of the inner and outer ring cross Roller Bearing is miniature minimal, especially ultra-thin structure is small size close to the limit, and has high rigidity, so the most suitable for industrial robot joints or rotating parts, machining center of the rotary table, the robot rotating parts, precision rotary table, medical instrument IC, measuring equipment, manufacturing device widely used.
5. high speed ability
6. reducing shaft length and machining cost, thermal expansion leads to a limited change in geometric size.
7. the nylon separator is used, the moment of inertia is low, the starting torque is low, and the angle degree is easy to control.
8. optimization of pretightening force, large rigidity, high precision of guiding roller
9. carbon steel provides excellent impact resistance and surface abrasion resistance
10. simple but fully lubricated

Crb Bearing

Crb Bearing,Cross Roller Slewing Bearing,Crb Turntable Slewing Bearing,Cross Roller Slewing Bearing Crb

LUOYANG AUTO BEARING CO.,LTD , https://www.lyautobearing.com