| PRODUCT NAME | ITEM NO. | PACKAGE SPECS | CBM/BOX | QTY/20GP Â (BOXES) | QTY/40HQÂ (BOXES) |
 ENGINE FLUSH |
FD006380ML300G |
380ML(300G)*24 |
0.024 | 1166 | 2916 |
Features:
It adopts refined oil as solvent, with special natural and detergent dispersant, and can remove all kinds of colloid,begrime,carbon deposit and other sediment in the engine effectively, and guarantee good lubrication, reduce frictional resistance,restore and improve automotive power.Restore elasticity of all gasket, rubber gasket inside the engine, enhance the sealing performance, reduce fuel consumption and engine wear, prolong the service life of oil and engine.
Directions:
1.Start vehicles and make the engine's temperature up to normal, then cut off the engine and add the product in the crankcase.2.Four-cylinder or six-cylinder engine add a pot, add two cans to more than eight cylinder engine.
3.Keep working in idling 5 -10 minutes, empty the old oil.
4. Add new oil after replace filter.
5.Suggest using once per 15000 km.
Precaution:
Suitable for large, medium and small gasoline and diesel engine.
Please store it in 45 ºC cool environment.
Keep out of reach of children. If enter the eyes accidently, please rinse thoroughly with water.
Operation if there is any discomfort, please stop operating and keep calm.
About Us
Tonyin Group was founded in 2007. The factory locate in Guangzhou.
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.
Factory tour
Exhibition
Â
 ENGINE FLUSH
| PRODUCT NAME | ITEM NO. | PACKAGE SPECS | CBM/BOX | QTY/20GP Â (BOXES) | QTY/40HQÂ (BOXES) |
 ENGINE FLUSH |
FD006380ML300G |
380ML(300G)*24 |
0.024 | 1166 | 2916 |
Features:
It adopts refined oil as solvent, with special natural and detergent dispersant, and can remove all kinds of colloid,begrime,carbon deposit and other sediment in the engine effectively, and guarantee good lubrication, reduce frictional resistance,restore and improve automotive power.Restore elasticity of all gasket, rubber gasket inside the engine, enhance the sealing performance, reduce fuel consumption and engine wear, prolong the service life of oil and engine.
Directions:
1.Start vehicles and make the engine's temperature up to normal, then cut off the engine and add the product in the crankcase.2.Four-cylinder or six-cylinder engine add a pot, add two cans to more than eight cylinder engine.
3.Keep working in idling 5 -10 minutes, empty the old oil.
4. Add new oil after replace filter.
5.Suggest using once per 15000 km.
Precaution:
Suitable for large, medium and small gasoline and diesel engine.
Please store it in 45 ºC cool environment.
Keep out of reach of children. If enter the eyes accidently, please rinse thoroughly with water.
Operation if there is any discomfort, please stop operating and keep calm.
About Us
Tonyin Group was founded in 2007. The factory locate in Guangzhou.
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.
Factory tour
Exhibition
Â
Â
CNC flame / plasma / laser Cutting Machine is a computer control, precision mechanical transmission technology combined with high efficiency, high precision, high reliability of the thermal Cutting Equipment, it applies to shipbuilding, boilers, electromechanical vehicles, steel, In the petrochemical industry, coal, port machinery, military and other manufacturing industries high-precision steel plate hot cutting of new automation equipment. The machine consists of host, rail parts, gas system, electrical control, machine foundation and other components, the use of bilateral cargo side of the door-driven structure.
GJ3015 CNC Fiber Laser Cutting Machine
CNC fiber laser cutting manchine is cutting-table structure designed machine with dual drive, effctive cutting range is from 1500mm to 6000mm. High-precision longitudinal and transverse linear rails drive high-precision helical gear and rack and it is available in speed up to 8000mm/min. Accelerated speed is 1G. Exchanging work tables are optional that optimize cutting productivity.
Technical specifications
Effective cutting length: 3000mm
Effective cutting width: 1500mm
Max. speed: 10000mm/min(returning speed)
CNC system: FSCUT
Laser generator: RFL-1000(Domestic sharp branch)
Smoke purification device: CCQ-9000(Wuxi Hulian)
Cutting torch: 1group( Cyplite )
Torch THC: BCS100,elevating distance≥100mm
Cutting Machinery,Cutting Machine,Cutting Equipment,Cutting Robot
SHIJIAZHUANG LONGXUAN TRADING CO., LTD , http://www.longxuanmachine.com