Model NO.: SF-60AB
Guaranty: 12month
Duty Cycle: 100%
Certificate: CE
System: IGBT
Trademark: YUELON
Specification: 50KW
Origin: Sf-100kw
HS Code: 8514400090
Max input power frequency: 60KW
Max input current: 110A
Maximum input power: 10-40kHz
Input voltage: 3phase 380V
Duty cycle: 100%

Model Max 
output 
power		 Frequency Max 
input 
current		 Working 
voltage		 Input 
voltage		 Duty 
cycle		 Water flow Generator 
weight		 Transformer 
weight		 Generator 
size
SF-30AB  30KW 10-40KHZ 48A 342-430V  
 
 
 
 
3phase 
380V
50/60HZ
 
 
 
 
 
 
 
 
 
 
 		 100%
 
 
 
 
 
 
 
 
 
 
 		  27L/(min)  
 
 
 
 
 
(0.1Mpa)
 
 
 
 
 
 
 
 
 
 
 		 61KG 31KG
SF-40AB 40KW 10-40KHZ 80A 342-430V 32L/(min) 73KG 37KG
SF-50AB 50KW 10-40KHZ 90A 342-430V 32L/(min) 75KG 41KG
SF-60AB 60KW 10-40KHZ 110A 342-430V 40L/(min) 80KG 46KG
SF-80AB 80KW 10-40KHZ 160A 342-430V 50L/(min) 106KG 68KG
SF-100AB 100KW 10-40KHZ 200A 342-430V 50L/(min) 121KG 91KG
SF-120AB 120KW 10-40KHZ 240A 342-430V 68L/(min) 138KG 95KG
SF-160AB 160KW 8-30KHZ 280A 342-430V 68L/(min) 151KG 121KG
SF-200AB 200KW 8-30KHZ 320A 342-430V 80L/(min) 172KG 125KG
SF-250AB 250KW 8-30KHZ 380A 342-430V 80L/(min) 180KG 131KG
SF-300AB 300KW 8-30KHZ 460A 342-430V 100L/(min) 185KG 136KG
SF-350AB 350KW 8-30KHZ 540A 342-430V 100L/(min) 192KG 141KG

Application:
Quenching: Quenching for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear(orchard shear).
Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, drive shaft, small shaft and fork.

Various electric tools: Gears and axes.
Quench for machine tool: Lathe deck and guide rail.
Quench for various hardware metal parts and machined parts, such as shaft, gear(chain wheel), cam, chuck and clamp etc.
Quench for hardware molds, such as small size mold, mold accessory and inner hole of mold.

Main characteristics:
1. IGBT inversion technology based LC series circuit .
2. phase locking looping technology and soft switch ensure good reliability, realize power and frequency tracking automatically.
3. diode rectifier cause high power factor more than 0.95
4. working continuously with 100% duty cycle, power can be instantly turned on or shut off.
5. perfect protective circuit and cooling system design, which ensure the good reliability of machine.
6. low energy consumption: converts up to 97.5% above of the expended energy into useful heat. energy saving 15%-30% compared with SCR induction heating machine.
7. environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees by eliminating smoke, waste heat, noxious emissions and loud noise.
8. operating and installation easily and safely
9. can substitute traditional heating methods.

Main characteristics:
>MOSFET power component and current inverting technologies have been used.
>simple structure and light weight.
> simple to operate, a few minutes is enough to learn it.
> simple to install, installation can be donne by unprofesstional person very easily.
> mul-tidisplay functions, with displays of over current, over voltage, water failure, phase failure and unfit lad 
and so on, machine can be protected from destroys and machines can be repaired easily.
> light weight, small size.
> different shape and size of induction coil can be changed easily to heat different parts.
> advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch 
production to improve the repeatability.
> the separated models are designed to fit the dirty surroundings, the generator can be put in a clean space 
to increase the reliability; with the small size and light weight of the separated transformer, it is conveient to 
use in the production line and easily assembled inside the machinery or moved mechanism. 

Main Application:
Rod forging
bolt, nut forging
heat treatment of shaft, gear, pin, etc.
shrink-fitting
annealing of pipe welding
etc.


Snow Removal Truck Mini Power Pack

Micro Hydraulic Power Pack,Harvester Hydraulic Power Unit,Pile Driver Hydraulic Power Unit,Snow Removal Truck Mini Power Pack

GRH , https://www.grhcn.net