Product Description
Component and Function  Coil Feeding Equipment
Consists of one hydraulic decoiler with capacity of 5000kgs and its base. The steel sheet is automatically fed to the leveling equipment under the function of friction and traction. It is a active decoiler, decoil speed can be matched the cutting machine speed which control by a switch, and has a press arm to press the coil to avoid the coil loose during turning. Also the hydraulic station is separate, it is off without expanding, which can save the power. It is only for this decoiler, so it can be used separately.
Â
Guiding Equipment:
Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.
Slitting device:Â
The machine has three rubber pinching rollers to driving the sheet. Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet. This device slits the sheet, adjust the slitting blade and can slit different size. And there have guage device, so it is convenient to adjust the slitting size manually.
Extension deivce
Which is in front of recoiler and mounted with recoiler together, it extension the sheet so can wind a tight coil, also it has partition to divide the sheet separately.
Recoiler part
Include stand, reducer device, recoiler shaft, recoiler expander device, mechanical support arm.
Â
PLC Control Panel
The electric controlling system of this machine consists of five parts: operating
system, screen, PLC, transducer and strong electricity part. The controlling system of
this machine are imported from Panasonic company of Japan. The system usesÂ
modularized structure and has convenient, reasonable, canonical wiring arrangement,
and its maintenance is quite easy. The independent operating console facilitates the
mutual dialogue between the operator and the machine. The operation is easy and
steady and can be chose operation by manual or automatically.
Â
Â
Standard Equipment of Machine Â
5T Hydraulic decoiler               1pc
Main machine              1pc
5MT hydraulic recoiler        1 pc
PLC Control Panel            1pc
Hydraulic station            3 pc
Components of line
Our service
1.We have professional team to make different kinds of roll forming machines for our customers, from designing, processing,assembling, debugging, delivery.
2.we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country.
3.You can send your men to our factory. we will teach them how to operate the machine without training charges.
4.Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line  how to operate the machine.
5.Apart from above training course,we also provide 1 year warranty for all the easily broken part of the machine for free and whole-life technical service support.
If there is any problems happened to the machine, we will provide solution at once.
Hope we could establish win-win business relations in the soon future!
FAQ
Q:How is this machine's service life?
A:In the normal maintenance,the service life at least 8 years.
Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,replace the hydraulic oil every 1-2 years.
Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.
Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.
Q:Mr.Alan,can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.
Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.
Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel coil,color steel coil,and aluminum coil.
Contact us
Â
Speaker Aluminum Basin Frame
Speaker aluminum basin frame is the production of multimedia speaker and toy horn accessories.
Function: it is the matrix of installation vibration system, support system and magnetic return system.
Material: Speaker cast aluminum basin frame, the basic function and iron basin frame work the same principle, is a relatively high-end speaker body parts. The process is more complex, the appearance is more high-end and beautiful, and the cost is also higher.
Surface treatment process: electroplating, electrophoresis, baking black. Color can also be customized according to customer requirements.
Modular products: there are a variety of different specifications for customers to choose.
Private mold products: can be customized, according to customer samples or drawings for development and production.
18 Inch Speaker aluminum basin frame/Product Display
18 Inch Aluminum Frame,18 Inch Horn Aluminum Frame,18 Inch Speaker Aluminum Frame,18 Inch Audio Aluminum Basin Frame
Fengshun County Boli Electroacoustic Co., Ltd. , https://www.gdfsboli.com