Marshall stability meter large-screen graphics LCD display can directly display the stability value, flow value of the test data and curves, test time. The display effect of the Chinese character display test is intuitive, and 100 sets of test data and test time can be stored internally. The test can be viewed at any time, the test is completed automatically, and the test can be automatically reset. The machine is equipped with an RS232 serial communication port, which facilitates communication with the host computer. The computer processes data, stores, prints, and displays the data. It can also be controlled and printed by a computer. The machine has manual control of rising, falling, and stopping at the same time. Features.
Use cautions:
1, the instrument power ground wire must be individually grounded.
2, pressure and flow sensor plug can not be inserted into the wrong; if not inserted into a direction can be inserted.
3. If the power grid has large interference, or if the voltage fluctuates fluctuately, the qualified users will be equipped with AC clean power, and the unconditional users will be equipped with an AC voltage regulator.
5, load part of the control line and printer cable can not be forced.
7. The instrument should not share a power socket with a high-power appliance.
8, the instrument should be placed in a dry place, do not often pull connector to prevent poor contact with the plug.
9. In humid areas, the sensors should be stored in a dry box.
10. When the instrument is not in use, cover it with a cloth to prevent dust from intruding.
11, please do not open or disassemble the instrument.
12. Before use, the instrument must be energized for more than 10 minutes.
Marshall stability meter

Welded Heat Exchanger

Welded heat exchanger has a compact structure design, efficient heat transfer performance and convenient and flexible use, which determines that it is born to replace the superior performance of traditional shell and tube heat exchangers.

The all-welded plate heat exchanger has a compact structure design, efficient heat transfer performance and convenient and flexible use, which determines that it has the superior performance of replacing the traditional tube and shell heat exchanger.

All welded plate heat exchanger structure and welding:
1. Appearance and form
The four ports of the all-welded plate heat exchanger are the upper and lower and left and right positions on the side, because the welding process is used, so the frame itself can not be opened.

2. Internal components
The sealing gasket is omitted inside the all-welded heat exchanger, all of which are welded by stainless steel sheets, usually used for high temperature and high pressure conditions, so the thickness of the sheets is 1mm.

Welded Heat Exchanger,Full Welded Heat Exchanger,Welding Heat Exchanger,Condenser Industrial Heat Exchanger

Jiangsu Baode Heat-Exchanger Equipment Co.,LTD , https://www.baodeexchanger.com