Summarize:
1.2SK vacuum pump suction sewage milking liquid ring vacuum pump is mainly used to pump air and other gas which is little corrosive, insoluble in water & with little solid.
2. The water input into the pump revolve with high speed to form pressure and closed water cavity to take away air from container in suction end.
3. Pump with double stage structure is higher vacuum degree, bigger pumping speed, compact structure, reliable operation, easy operating & maintenance.
4. China vacuum pump is widely used in food industry, textile industry, medicine industry, chemical industry, dipping, drying or other craft processes
Â
Product details:
| Working Principle: | Water ring vacuum pump |
| Main applications:Â Â | Air & Gas |
| Driver: | Electric motor |
| Power Specs: | 380/415V 3phase; 220/240V 1phase; 50hz/60hz |
| Max.permissible fluid temperature: | 50°C(122°F) |
| Type of connection: | Flange |
| Installation position: | Horizontal |
| Casing parts material: | Cast iron, stainless steel |
| Shaft seal type:Â Â Â | Mechanical seal, Packing seal |
| Free passage:Â Â | 0mm |
| Limited vacuum: | -0.097Mpa(-0.97bar) |
| Maximum drive rating:Â Â | 55KW(75HP) |
| Maximum caliber:Â Â Â | 125mm(5inch) |
| Flow rate range:Â Â Â | 54-1800m3/h(237.6-7920US.GPM) |
Â
Performance data:
| Model | Capacity (m3/min) | Limiting Pressure | Power (KW) | Speed (r/min) | Compressor Pressure (Mpa) | |||
| MAX | Suction pressure: 0.041Mpa Max(-450mmHg) | mmHg | Mpa | Vacuum Pump | Compressor | |||
| SK-1.5 | 1.5 | 1.35 | -680 | -0.091 | 4 | 4 | 1440 | 0-0.1 |
| SK-3 | 3 | 2.8 | -700 | -0.093 | 5.5 | 7.5 | 1440 | 0-0.1 |
| SK-6 | 6 | 5.4 | -700 | -0.093 | 11 | 15 | 1460 | 0-0.1 |
| SK-9 | 9 | 8.1 | -700 | -0.093 | 15 | 22 | 970 | 0-0.1 |
| SK-12 | 12 | 10.8 | -700 | -0.093 | 18.5 | 30 | 970Â 980 | 0-0.1 |
| SK-15 | 15 | 13.5 | -700 | -0.093 | 30 | 45 | 980 | 0-0.1 |
| SK-20 | 20 | 18 | -700 | -0.093 | 37 | 55 | 740 | 0-0.1 |
| SK-30 | 30 | 27 | -700 | -0.093 | 55 | 75 | 740 | 0-0.1 |
| SK-42 | 42 | 37.8 | -700 | -0.093 | 75 | / | 740 | / |
| SK-60 | 60 | 54 | -700 | -0.093 | 90 | / | 590 | / |
| SK-85 | 85 | 76.5 | -700 | -0.093 | 132 | / | 590 | / |
| SK-120 | 120 | 108 | -700 | -0.093 | 185 | / | 490 | / |
 
Â
Zhejiang Yonjou Technology Co., Ltd is one of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc.
Summarize:
1.2SK vacuum pump suction sewage milking liquid ring vacuum pump is mainly used to pump air and other gas which is little corrosive, insoluble in water & with little solid.
2. The water input into the pump revolve with high speed to form pressure and closed water cavity to take away air from container in suction end.
3. Pump with double stage structure is higher vacuum degree, bigger pumping speed, compact structure, reliable operation, easy operating & maintenance.
4. China vacuum pump is widely used in food industry, textile industry, medicine industry, chemical industry, dipping, drying or other craft processes
Â
Product details:
| Working Principle: | Water ring vacuum pump |
| Main applications:Â Â | Air & Gas |
| Driver: | Electric motor |
| Power Specs: | 380/415V 3phase; 220/240V 1phase; 50hz/60hz |
| Max.permissible fluid temperature: | 50°C(122°F) |
| Type of connection: | Flange |
| Installation position: | Horizontal |
| Casing parts material: | Cast iron, stainless steel |
| Shaft seal type:Â Â Â | Mechanical seal, Packing seal |
| Free passage:Â Â | 0mm |
| Limited vacuum: | -0.097Mpa(-0.97bar) |
| Maximum drive rating:Â Â | 55KW(75HP) |
| Maximum caliber:Â Â Â | 125mm(5inch) |
| Flow rate range:Â Â Â | 54-1800m3/h(237.6-7920US.GPM) |
Â
Performance data:
| Model | Capacity (m3/min) | Limiting Pressure | Power (KW) | Speed (r/min) | Compressor Pressure (Mpa) | |||
| MAX | Suction pressure: 0.041Mpa Max(-450mmHg) | mmHg | Mpa | Vacuum Pump | Compressor | |||
| SK-1.5 | 1.5 | 1.35 | -680 | -0.091 | 4 | 4 | 1440 | 0-0.1 |
| SK-3 | 3 | 2.8 | -700 | -0.093 | 5.5 | 7.5 | 1440 | 0-0.1 |
| SK-6 | 6 | 5.4 | -700 | -0.093 | 11 | 15 | 1460 | 0-0.1 |
| SK-9 | 9 | 8.1 | -700 | -0.093 | 15 | 22 | 970 | 0-0.1 |
| SK-12 | 12 | 10.8 | -700 | -0.093 | 18.5 | 30 | 970Â 980 | 0-0.1 |
| SK-15 | 15 | 13.5 | -700 | -0.093 | 30 | 45 | 980 | 0-0.1 |
| SK-20 | 20 | 18 | -700 | -0.093 | 37 | 55 | 740 | 0-0.1 |
| SK-30 | 30 | 27 | -700 | -0.093 | 55 | 75 | 740 | 0-0.1 |
| SK-42 | 42 | 37.8 | -700 | -0.093 | 75 | / | 740 | / |
| SK-60 | 60 | 54 | -700 | -0.093 | 90 | / | 590 | / |
| SK-85 | 85 | 76.5 | -700 | -0.093 | 132 | / | 590 | / |
| SK-120 | 120 | 108 | -700 | -0.093 | 185 | / | 490 | / |
Â
Â
Zhejiang Yonjou Technology Co., Ltd is one of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc.
The Introduction of PCD
The PCD (Polycrystalline diamond) is a composite material, consisting of sintered diamond particles with a metallic binder. Diamond is the hardest material in absolute terms and therefore also the most resistant to abrasion. Used as a cutting tool, it has a good wear resistance, and a yield superior to traditional sharp carbide. The machined surface roughness with the PCD can reach comparable to the adjustment.
Main applications
â–²Processing of non-ferrous
â–²Aluminum alloys with high or low silicon content (pistons, engine blocks engine, wheels, carburetors, connecting rods, gear boxes, cylinders for brakes, etc.).
â–²Bronze and copper alloys (copper manifolds, engine bearings, bushings, connecting rods eyes, locations pumps etc.).
â–²Tungsten carbide (trafilatori rollers and other components sintered etc).
â–²Pieces composed of aluminum and lead, aluminum engine blocks with cast iron pipes reported
â–²Processing of non-metallic materials
â–²Very abrasive materials, such as ceramics industrial uncooked.
â–²Some fired ceramic: zirconia aluminum oxide, such as spark plugs and insulators.
â–²Glass, plastics with glass fibers, carbon fibers.
The Introduction of PCBN
PCBN has the characteristics of high thermal stability, high hardness, high wear resistance and. It`s inert to iron family element, hence PCBN is mainly used for the machining of high hardness and hard processed ferrous materials, such as d facing alloys, harden steel, pearlitic gray cast iron, high temperature alloy, high-speed steel, hard facing alloys, Ni-Cr alloy, powder metallurgy metals.
PCD/PCBN,Drilling PDC,PDC for Drill Bit,PDC for Bolting Bits
Henan Huanghe Whirlwind International Co., Ltd. , https://www.huangheindustry.com