Mining workers often classify deposits according to their occurrence.
  First, according to the thickness of the points:
(1) Recording ore bodies: ore bodies with a thickness of 0.6 to 0.8 m;
(2) Thin ore bodies: ore bodies with a thickness of 0.8 to 2 m;
(3) Medium-thick ore bodies: ore bodies with a thickness of 2 to 5 m;
(4) Thick ore bodies: ore bodies with a thickness of 5 to 20 m;
(5) Extremely thick ore bodies: ore bodies with a thickness greater than 20 m.
   Second, according to the angle of inclination:
(1) Horizontal deposits: the inclination angle is between 0° and 3°;
(2) Slowly inclined deposits: the inclination angle is between 3 ° and 30 °;
(3) inclined deposits: the inclination angle is between 30 ° and 50 °;
(4) A steeply inclined deposit: a deposit with an inclination of more than 50°.
  Third, according to the form:
(1) Layered deposits: formed due to sedimentation;
(2) Vein-like deposits: formed by filling in the gap due to hydrothermal action;
(3) Bulk deposits: formed by filling, metasomatism and vaporization.
As shown in Figure 1, (α) is a layered deposit, (b) is a vein deposit, and (c) is a massive deposit.
Figure 1 Schematic diagram of the deposit type

Water Soluble Fully Synthetic Cutting Fluid

It is a kind of biological stable fully synthetic cutting fluid specially developed for hard ferrous metals. it is a formula contains no oil, will have good processing performance in hard water and soft water.


Application:

Suitable for processing of ferrous metals and copper, magnesium aluminium alloy and titanium alloy.

Processing Method :

Suitable for normal processing methods, including turning, drilling, grinding, tapping, reaming and mild broaching. This product can be equipped for sole machine and central cooling system.

Features:

Biological stable formula, long life due to high effective bactericidal system.

Excellent antirust and deodorizing property, good corrosion inhibit performance, good stability.

Low foam, good compatibility with various water.

Good washing and cooling performance.

Excellent lubricity and extreme pressure performance, effectively prolong tools life.

Working fluid super low volatility, reduce fluid consumption.

No odor, friendly to operator and environment.

Not destroy paint and is compatible with machine tool seals that are commonly used.

Recommended used concentration:

Process Material

Process Method

Cast iron

Low carbon steel

High carbon steel

Stainless steel

Heat resisting alloy

Nonferrous metal

Turning

4.5%

4.5%

5%

5%

5%

4.5%

Milling

4.5%

4.5%

5%

5%

5%

4.5%

Drilling

5%

5%

5.5%

6%

5.5%

5%

Tapping

5%

5%

5.5%

6%

5.5%

5%

Grinding

4%

4%

5%

5%

5%

4%

Sawing

5%

5%

5.5%

6%

5.5%

5%

Note: For excellent antibacterial ability, the recommended used concentration is not less than 4%.

Typical Data

Item

Test Method

Unit

Typical Data

Concentration Fluid

Appearance

BAM 300

-

Gold yellow

transparent liquid

Density(20°C)

IP365

g/ml

0.89

5% Dilution Solution

Appearance

BAM 189

-

Translucent

creamy white

PH value

BS1647

-

9.0

Antirust:

Steel

Aluminium

IP287

-

-

-

0%

No rust spot

Foam performance

IP312

s

13

Refractive

meter reading

-

-

70


Note: Above are typical data, not represent specifications. If in need, MSDS is available, you can obtain information about storage, safety operation and handling. The data above is as accurate as possible, but may change based on future formula change.



Water Soluble Fully Synthetic Cutting Fluid

Fully Synthetic Cutting Fluid,Water Soluble Fully Synthetic Cutting Fluid,Water Soluble Grinding Fluid Mwf,Glass Grinding Metal Working Fluid

Zhengzhou Chorus Lubricant Additive Co.,Ltd. , https://www.cn-lubricantadditive.com