High Pressure Blower 7 Points Features

The following describes the characteristics of the high pressure blower:

High-pressure blowers are also called vortex pumps, compressors/vacuum pumps, ring blowers, and air ring vacuum pumps.

High pressure blower has the following features:

1, compared to other types of fans, such as the Roots blower, the operation of the noise is lower, the greater the power, the more obvious more than 5.5KW will be displayed;

2, maintenance-free use; its loss of parts is only two bearings ‚ within the warranty period, ‚ basically no maintenance;

3. Relative to centrifugal fans and medium-pressure fans, the pressure is much higher, which is often more than ten times that of centrifugal fans.

4. If the pump body is a one-piece die-casting unit and a shock-proof mounting foot is used, then the requirements for the installation base are very low, and it is even possible to operate normally without a fixed foot seat. This is very convenient and saves installation costs. And installation cycle

5, with blowing and suction dual function, a dual-purpose machine can be used to suck the wind can also use the hair; also can use the suction and the hair dryer is equivalent to the function of the rotary vane vacuum pump;

6. The output air is clean with less oil or no oil.

7. The mechanical wear of the high pressure blower is very small. Because there are no other mechanical contact parts except the bearing, the service life is very long. As long as it is under normal conditions of use, it is absolutely no problem if it is 5-7 years. of.