Glazed Roof Tile Roll Forming Machine

Technical Parameters:

1. Coil width: 1220mm, 1250mm (PPGI, Galvanized steel; Yield strength: 250Mpa)

2. Output speed: 5 - 10m/min

3. Coil thickness: 0.3 - 0.8mm

4. Roller station: 17 stations

5. Main motor power: 11kw

6. Hydraulic oil pump motor: 5.5kw

7. PLC system: Panasonic, Siemens, Yaskawa

8. The weight of main machine about: 10 tons

9. Machine dimension: about 9mx1.7mx1.7m

10. Cutting type: 3D cutting without waste coil or hydraulic cutting
 

 

Packing & Delivery




Not only the Good Machine, but also the Most Attentive Service
Integrity Solution & Turnkey Project
Creat the Value of Steel
Technical Parameters:

1. Coil width: 1220mm, 1250mm (PPGI, Galvanized steel; Yield strength: 250Mpa)

2. Output speed: 5 - 10m/min

3. Coil thickness: 0.3 - 0.8mm

4. Roller station: 17 stations

5. Main motor power: 11kw

6. Hydraulic oil pump motor: 5.5kw

7. PLC system: Panasonic, Siemens, Yaskawa

8. The weight of main machine about: 10 tons

9. Machine dimension: about 9mx1.7mx1.7m

10. Cutting type: 3D cutting without waste coil or hydraulic cutting
 

 

Packing & Delivery




Not only the Good Machine, but also the Most Attentive Service
Integrity Solution & Turnkey Project
Creat the Value of Steel

Feature editing
1, the pulse bag type Dust Collector [1] uses the split room pulsing pulsate cleaning technology to overcome the shortcomings of the conventional pulse duster and the chamber back duster. It has strong cleaning ability, high dust removal efficiency, low emission concentration, small air leakage rate, less energy consumption, less steel consumption, less area, stable and reliable transportation and good economic benefit. It is suitable for purification and recovery of dust gas in metallurgy, building materials, cement, machinery, chemical industry, electric power and light industry.
2. Due to the use of parting air pulse to blow the ash and blowing ash, it can reach the goal of thoroughly cleaning ash once, so the period of dust removal is prolonged, the energy consumption of ash clearing is reduced, and the air pressure consumption can be greatly reduced. At the same time, the fatigue degree of the filter bag and the pulse valve is reduced correspondingly, thus multiplying the service life of the filter bag and the valve piece.
3. Maintenance and replacement bags can be divided into chambers under the condition of continuous system blower and normal operation of the system. The bag bag mouth adopts elastic expansion ring, which has good sealing performance and firmness and reliability. The filter bag keel is polygonal, which reduces the friction between the bag and the keel, prolongs the life of the bag, and is convenient for unloading the bag.
4. The upper bag is adopted. After changing the bag, the bag is put out and the dirty bag is put into the bottom ash hopper of the box. It is removed by Kong Chu and improved the operation condition of the bag changing.
5. The box is designed with tightness, good sealing performance, good sealing material for inspection door, leak detection with kerosene in production process, and low leakage rate.
6. Inlet and outlet air duct is compact and airflow resistance is small.

Pulse Bag Collector

Pulse Bag Collector,Bag Filtering Dust Precipitator,Dusty Air Cleaning Equipment ,High Temperature Pulse Bag Collector

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com