Model NO.: A+E-82FY
Measuring Media: Liquid
Measuring Principle: Mechanics
Measurement Object: Closed Pipeline
Certification: ISO
Item: Diesel Flow Meter
Measuring Range Ratio: 1:10, 1:15, 1:20
Temperature: -20~+120 C (-4 to 248 F)
Material: SS304L or SS316L
Power Supply: 24V DC or Battery
Transmitting Distance: <1, 000m (3280FT)
Output Signal: Pulse, 4-20mA with Hart, RS485
Explosion-Proof: Exd II Bt6
Protection: IP65
Trademark: AEAD
Transport Package: Carboard Box, Wooden Case
Origin: Shanghai
HS Code: 9026100000

Fuel Flow Meter(A+E 82FY)

Diesel flow meters use the mechanical energy of the fluid to rotate a pinwheel (rotor) in the fluid diesel. Blades on the rotor are angled to transform energy from the fluid diesel into rotational energy. The rotor shaft spins on bearings. When the diesel moves faster, the rotor spins proportionally faster.


Features
--Accuracy reaching ±1.0%F·S.
--Short-term repeatability reaching 0.05%~0.2%.
--Output pulse frequency signal, which is suitable for gross metering and connection to the computer. No zero drift and strong anti-interference capability.
--3-4kHz frequency signal , and high signal resolution.
--Wide range with 1:20 for medium and large caliber, 1:10 for small caliber.
--Compact and light structure, convenient installation and maintenance, great capability.
--Suitable for measuring high pressure. Easy to be made into high-pressure meter.
--Various kinds of specified sensors.

This diesel flow meter has a wide measuring range, and the limit of the flow velocity is lower than 0.5m/s. The pressure loss is low and the impeller has strong impact resistance, anti-electromagnetic interference and anti-vibration capability. So the performance is reliable and the operating life is long. Turbine diesel flow meter has the advantages of built-in pressure & temperature sensor, high safety, compact structure, beautiful appearance and small pressure loss.


Fuel Flow Meter
Technical Parameters


Fuel Flow Meter
Model Selection

Model A+E 82F  
Media Y liquid
Q gas (excluding stream)
DN xx  
Structure Z integrate type
L split type
Senor Requirement 1 normal
2 wear-resistant
3 anti-corrosive
PN 1 1.6MPa
2 2.5MPa
3 4.0MPa
4 6.3MPa
5 16MPa
6 25MPa
7 40MPa
Connection G non-sealed pipe thread
R sealed thread
F flange
J clamp-on
K quick-release 
Accuracy 1 0.2
2 0.5
3 1
Explosion-proof 0 N/A
1 Yes
Output 1 pulse
2 4-20mA
3 Hart
Power Supply 1 built-in battery
2 built-in battery and out 24VDC 
3 out 24VDC
Material 1 304L
2 316L

Hydraulic Steel Car Ramp

Hydraulic Steel Car Ramp,Car Ramps,Vehicle Ramps,Metal Car Ramps

WUQIANG HONGMA TOOLS MANUFACTURE CO., LTD , https://www.zjhongma-tool.com