Introduction: fiber laser cutting machine is a Laser Cutting Machine that uses a fiber laser generator as a light source. It can be used for plane cutting or bevel cutting. It is suitable for sheet metal processing, aerospace, electronics, precision parts, metallurgical equipment, etc. The industry's high-precision cutting process, high photoelectric conversion rate, and energy saving and environmental protection.
Fiber Laser Cutting Machine is a laser cutting machine that uses fiber laser generator as a light source. It can be used for plane cutting and bevel cutting. It is suitable for sheet metal processing, aerospace, electronics, precision parts, metallurgical equipment and other industries. High-precision cutting, high photoelectric conversion, energy saving and environmental protection.
Fiber laser cutting machine works
The fiber laser cutting machine mainly uses a fiber laser generator as a light source. The fiber laser is a new type of fiber laser that outputs a laser beam with a high energy density and collects on the surface of the workpiece to instantaneously melt and gas the area on the workpiece that is irradiated with the ultrafine focus spot. The automatic cutting is achieved by moving the spot irradiation position by a numerically controlled mechanical system.
Fiber laser cutting machine maintenance
1. Always check the strip to ensure that the strip is tight.
2. Regularly check the straightness of the track and the verticality of the machine and find that it is not normal to maintain and debug in time. Avoid increasing the error and affecting the cutting quality.
3. Always use a vacuum cleaner to remove dust and dirt from the machine. All electrical cabinets should be closed and dust-tight.
4. Regularly clean the guide rails and motors, eliminate dust and other debris, and ensure that the equipment is normal; racks should be wiped regularly, add lubricating oil, and ensure lubrication without debris.
So what is laser engraving? The term [laser" is an acronym for Light Amplification by Stimulated Emission of Radiation. Basically a beam of light is reflected through a series of mirrors, that points the beam downward through a focus lens which is designed to concentrate the light into heat at an exact point. That point where the laser touches the surface is called the [focal point" and is where the heat is most intense. This focal point is less than a millimeter in size, however the diffraction of heat upon contact with the surface usually equates to roughly 1/200" in actual cutting accuracy. We produce cnc router machines for many years. How does laser engraving drifter from traditional printing? When you print something traditionally you add ink to paper. This is the opposite. We use the laser to remove material and what is normally [printed" will be cut away from your card with visible depth and texture. By varying the intensity of the beam, we can engrave at different depths, or even cut all the way through the material for a unique edge or die cut look. Another great thing about this process is that it does not involve any bits, blades, ink, or other components that need to be replaced, which allows us to ensure that each and every card is consistent in it`s look and end quality. We also offer full color UV printing which can also be done with laser engraving for a unique pairing.
Laser Engraver,Cnc Laser Engraver,Laser Cutter Engraver,Metal Laser Engraver
JINAN XUANLIN MACHINERY CO., LTD. , https://www.cncfiberlaser.com