The day before yesterday was 6.1, which means that we have basically entered the summer season. In addition to the daily cleaning, the summer sanitation work has more road cooling. Cleaning the sweeping vehicle also replaced the sweeping vehicle and become the main vehicle for sanitation work. Here is a brief introduction of the sweeper sweeper vehicle cleaner:
Cleaning the sweeping vehicle basically bears the sanitation task of the major roads in large, medium and small cities. It cleans the sweeper front two brush sets, the mid-range sucker, and a powerful v-shaped sprayer. Most of the sweeper sweepers are refitted from Dongfeng and other Type II Frames. Since the sweeper sweeper has two brush sets and a high-pressure spray head, it can be used as a sweeper to clean the road alone or as a high pressure during the operation. Rinse the car to flush the road, of course, can also meet more complex road conditions, to achieve cleaning and flushing at the same time. The versatility of cleaning sweepers meets the needs of different roads.
The sweeper sweeper uses the Cummins secondary engine as the power for disc brushes and V-type high-pressure nozzles. Made of stainless steel tanks and waste bins. The two water tanks are distributed on the front of the power cabin and on the side of the dustbin respectively. The sweeping vehicle trash bin has an automatic unloading function, and a built-in high-pressure spray head makes the unloading garbage more convenient and clean. Cleaning sweeper structure is reasonable, easy maintenance.
When using the sweeper truck to carry out the work, follow the instruction manual. If there is wrong operation, it will cause unnecessary accidents. When performing cleaning operations, pay attention to the number of pressure indications and the water meter. When water is at a dangerous level, add water in a timely manner to avoid damage to the equipment. When cleaning the sweeping vehicle, the operator cannot leave the operating cabinet. The operator must first send the sprayer into the pipeline and then open the three valves. During this period, the personnel must not approach the sprayer to avoid injury. Clean sweeping vehicles should use clean water to avoid the use of sewage, sewage will not only shorten the service life, but also lead to cavitation.
The above is a brief introduction of Xiao Bian's use of cleaning sweeper vehicles , functions, and precautions. If there is any doubt, they can contact our staff. (Wen/Jun Xun)
Stainless Steel Heald,Heald For Weaving Loom,Metal Heald,Duplex Wire Heald
Transally weaving accessories Co., Ltd , https://www.transally-co.com