Although the economy of the machinery industry still faces various difficulties in the second half of this year, the overall operating environment is good. With the implementation of policies and measures to promote economic growth, the machinery industry has steadily recovered from the bottom in the second quarter. It is expected to continue the momentum of the second quarter and gradually increase the recovery rate in the second half of the year. In the fourth quarter, it is expected to reach double-digit speed again. increase. It is expected that the total output value of the machinery industry will increase by about 12% over the previous year, and the profit will increase by about 8% over the previous year. However, the foreign exchange earned from exports is expected to decrease by about 1% over the previous year.
The favorable factors faced by China's machinery industry in the second half of this year are as follows: First, the country has clearly implemented the proactive fiscal policy and moderately loose monetary policy, and the macroeconomic situation is expected to pick up further. Under this background, the demand for machinery products from all walks of life is expected to continue to grow; second, the supply of energy and raw materials is relatively loose, which is conducive to the cost control and efficiency improvement of the machinery industry; and thirdly, the state regulates and revitalizes the equipment manufacturing industry. Various policies of the auto industry (such as encouraging independent innovation, encouraging the acceleration of automobile renewal, increasing the export tax rebate rate of certain mechanical products, and transformation of value-added tax, etc.) are continuing to be implemented, and will surely accelerate the pace of development of the machinery industry. Fourth, due to the second half of last year, in particular, In the fourth quarter, the pace of development of the machinery industry dropped steeply, which reduced the comparative base for the second half of the year, and was therefore more conducive to the improvement of the growth rate in the second half of this year.
At the same time, however, unfavorable factors still exist, mainly due to the lack of external demand, and there is still no clear prospect of improvement. According to analysis by the World Bank and other countries, the prospects for global economic recovery are still unpredictable, and it is difficult for the machinery industry's foreign trade export market to improve significantly in the short term.

Liugong  Bullzoer Part

Liugong Bulldozer Part Including Liugong bulldozer Undercarriage part , Engine part and Electrical part .

1. Liugong Buldlozer TD40-E Product Technical Parameter

Cab comfort, sealing, sound insulation, equipped with: air loop system, air conditioning/warm wind again, luxurious and comfortable suspension seat can be adjusted to the right to 14 degrees, in line with the ergonomics design of joystick, make the shovel manipulation

Slightly tilted and tapered hood gives the operator a wider view of the shoveling tool pusher

Unique suspension design, high reliability, easy to drive smoothly

The front scraper hoist cylinder provides more lift force for the shovel

The large-capacity shovel is equipped with full-width wear protection plate and double system of left and right tilt/back tilt, which is suitable for all types of pushing work

The 384KW (515hp) cummins QSK19 engine meets European EUStage 3A and us EPA Tier3 emission standards

Multi - component modular cooling system, with hydraulic driven fan, different speed, improve cooling capacity

Double open shutter type radiator grille

The walking speed preset system and automatic gear reduction function improve the working efficiency

The modular drive system facilitates the diagnosis and detection of ports, filters and observers, and improves the maintainability

The unique dual speed steering system provides superior traction, steering ability, 6 different speed forward and backward gear

Advanced electro-hydraulic control system

The enlarged track center distance improves slope stability and heat dissipation performance

The front and rear lights provide adequate lighting for night operations

It can be used in polar and hot climate, metallurgy and coal shoveling to improve the versatility of bulldozers

Two gear drive steering system provides good transmission steering performance

Large capacity shovel, more load

 2. Liugong bulldozer Model

TD40-E, B160C, B160CL, B161CL, B230,B230R, B320 Bulldozer

3. Liugong  bulldozer undercarriage spare parts TD40-E bulldozer

Track system is Maintain correct Track Shoe Aseebly   tension, Absorb the vibration of the guide wheel as the bulldozer moves. Crawler Ider assembly and work with the crawler tensioning mechanism to provide the crawler assembly with the appropriate tightness. The Track Roller (Single or Double Flange) supports the weight of the bulldozer on one hand and prevents the track from derailment during walking on the other.

Liugong Bullzoer Part

4.  Liugong   bulldozer Use Engines Type

  TD40-E   Cummins QSK19 Engine 384KW 515HP

  B160C    Weifang Diesel Engine WD10G178E25 120KW

  B230R     Chongqing Cummins NT855-C280S10 Engine 169KW   

       B320       Chongqing  Cummins  NTA855-C360S10  Engine 235KW

5. Other Liugong Equipment

Liugong Brand Wheel Loader , Excavator, Roller,Motor Grader , Skid Steer Loader , Backhoe Loader, Forklift , These Construction Machinery Genuine and OEM Spare parts we can provide .

Another Bulldozer Parts we can provide as following: 
Bulldozer parts: Shantui Bulldozer Part, Shanghai Pengpu Bulldozer Part, HBXG Bulldozer Part , Liugong Bulldozer Part, Tianjin YISHAN Bulldozer Part. 
 



Liugong Bulldozer Part

Liugong Bulldozer Part,Liugong Spare Parts,Liugong Parts,Bulldozer Spare Part Cylinder Support

Jining Kunpeng Construction Machinery Equipment Co., Ltd , https://www.excavatorenginepart.com