Fine high-energy rubber powder signing ceremony site
It is reported that the fine high-energy rubber powder project is mainly through the "Chen's theory" invented by Dr. Chen Aiqi, which completely changes the traditional dry tire production method of rubber powder, through the full physical decomposition process, fully automatic control, and produces "fine high performance". The structural rubber powder not only has better performance than the traditional dry-process rubber powder, but also has a wider application range, and can be widely applied in highways, airports, military industries, automobiles and other industries. At the same time, there is no waste discharge in the production process, which solves the historical problem and completes the industrial upgrading of waste tires into fine rubber powder.
Dr. Chen Aiqi is an internationally renowned expert in polymer materials. His research and development of wet-process high-performance fine rubber powder has revolutionized the world's existing rubber powder production technology, process and rubber powder quality. It is called “Chen's Theoryâ€. Zhongjiao Weiye (Beijing) Technology Development Co., Ltd. introduced Dr. Chen Aiqi's wet-finished rubber powder technology, and has built the first wet production line with an annual output of 20,000 tons in Jingshan County, Hubei Province, and launched the national plan to lay production bases. The only project in East China was eventually settled in Wuyuan County.
“The establishment of wet fine rubber powder production in Wuyuan has the location, raw materials, market foundation and implementation of national strategic advantages.†The relevant person in charge of the project said that the construction of Shandong new and old kinetic energy conversion demonstration zone, one of Zibo's positioning is the new material industry. The use of rubber powder industry, combined with the transformation and upgrading of local chemical and building materials industry to achieve green building materials and chemical industry, is an innovative industry with industrial upgrading and social responsibility.
Waste tire recycling production line
According to reports, after the production of the fine high-energy rubber powder project in Wuyuan County, the industrial chain will be further extended, and the environmental protection and recycling of used tires will be taken as the source to comprehensively lay out the surrounding products of the project. Including the establishment of waste tire collection platforms, the establishment of centralized environmental protection production bases, the establishment of rubber bitumen production bases in industrial parks, and the introduction of rubber and plastics materials production enterprises.
In addition, the project will actively declare the new and old kinetic energy conversion new material innovation demonstration park in Shandong Province, taking the park as the leader and leading industries as the guide, formulating relevant investment policies, optimizing the local government industrial structure, and improving local investment in Wuyuan. Conditions to form an emerging industry format.
Reading volume: Source: Report of the tire: cold autumn
Acrylic swimming pool panel can be used for the side wall and bottom of the swimming pool, transparent crystal clear transparent, high gloss, smooth surface level off, the light transmittance as high as 92%, pervious to light, light weight, lighter than common glass half, bear the load of small buildings and stents, safety performance is high, almost no risk of fracture, adaptability to the natural environment is very strong, Even if a long time in the sun, wind and rain will not make its performance change, anti-aging performance is good, in the outdoor can also be safe to use, easy to maintain, easy to clean, the rain can be cleaned naturally, or with soap and soft cloth to scrub. 
Acrylic Swimming Pool Panel,Pmma Swimming Pool Panel,Pmma Swimming Pool Wall Panels,Pmma Swimming Panel Pools
Jiangsu Jinsui Acrylic Technology Co., LTD , https://www.jinsuiacrylic.com