[China Instrument Network Instrument Development] How to ensure the safety of drinking water, how to monitor the safety of water quality in real time may be the world's most concern. Recently, the research team at the University of British Columbia in Okanagan has overcome this problem and developed a water quality detector using 3D printing technology to detect the quality of drinking water.

It is understood that the R&D team was led by Professor Mina Hoorfar, Dean of the University of British Columbia’s School of Engineering. The 3D-printed water detector developed can monitor water sources in any water area in real time to reduce infections such as E. coli. Waterborne diseases pose a threat to human health.
"The current water quality monitoring can only be carried out on a regular and manual basis, so that the test results are subject to the sampling frequency and there is a great possibility of disease outbreaks. Because traditional water quality monitoring detectors are extremely expensive and unstable, they cannot be real-time. Deployed in the entire water area for testing.” According to Professor Mina Hoorfar, “Water quality monitor developed using 3D printing technology can not only monitor in real time, but also greatly reduce the production cost.
"As a result, the development of this 3D-printed water quality detector is of great significance for the future of water quality measurement to solve the existing detection methods that need to be manually monitored manually and cannot be monitored in real time.
It is reported that the entire 3D printing water quality detector was produced in the high-tech thermal fluid laboratory of the University of British Columbia. The detector is designed to operate in a wireless mode and can read water quality information at any water pressure and temperature. In addition, each detector can work independently, so that it can ensure that any detector in the water area does not affect the normal operation of other detectors.
In addition, compared with the traditional way of sampling timing, and now this continuity 3D printing quality detectors work greatly increased the level of water quality and safety monitoring. And because of its simple and small size, the detector can be installed not only in open waters, but also in home water systems, improving the quality of safe life from all aspects.
(Original Title: How to Guarantee the Safety of Drinking Water? The 3D Print Water Detector has it!)

Features for Feed Off The Arm Sewing Machine: Double lap-seaming, three or two needles, lap-seamers that climb sixteen plies with ease; Upper puller and differential feed Chainstitch with high step, the denim feeding is easier&smoother; This series machine supply various function, annex and Parts, convenient for selecting the most suitable way to finish the seaming; Lower quiver& noise when high speed running. Suitable for stitching on the loop of jeans&leisure trousers, which material from medium to heavy,loop width 8-12mm.

Feed Off The Arm Sewing Machine

Feed Off The Arm Sewing Machine,Industrial Feed Off The Arm Sewing Machine,Small Feed Off The Arm Sewing Machine,Double Needle Feed Off The Arm Sewing Machine

DONGGUAN CHUANGHUI SEWING MACHINE CO.,LTD , http://www.ch-sewing.com