According to Wuhan Finance Bureau's Wucai Caiji [2012] No. 2244 plan release letter and/or government procurement method change approval letter, Wuhan Jitong Engineering Bidding Agency Co., Ltd. is entrusted by the (Wuhan Environmental Monitoring Center) to (national environmental air Construction of monitoring network (Phase I) Urban environment air automatic monitoring equipment equipment project) (open bidding) procurement. Potential bidders (suppliers) who meet the eligibility criteria are welcome to participate in the bidding (negotiations, quotations). I. Project Overview (1) Project Number: WHJT—CZH—2013—1147
(II) Project Name: Construction of National Environmental Air Monitoring Network (Phase 1) Urban Environmental Air Automatic Monitoring Instrument and Equipment Project (III) Purchase Budget: RMB 9.08 million (IV) Project Content and Demand:
1. This procurement is divided into 1 project packages. The specific requirements are as follows. Detailed technical specifications, parameters and requirements are listed in Chapter 3 of the procurement document of this project.
The first package:
(1) Item package number: 1
(2) Project package name: National Environmental Air Monitoring Network Construction (Phase 1) Urban Environmental Air Automatic Monitoring Equipment and Equipment Purchase Project (3) Category (Cargo/Engineering/Service): Goods (4) Uses: Used for national environmental air monitoring Network Construction (5) Quantity: One Batch (Quantity Unit)
(6) Plan duration: 20 (calendar days)
(7) Service period: one year (day/month/year)
(8) Brief technical requirements: zero drift of sulfur dioxide (SO2) analyzer <1.0 ppb/24 hours, span drift <1.0% FS/24 hours, etc. (9) Purchase budget: RMB 9.08 million (10) Lead time/delivery period / Service start date: Delivery within 20 days after contract signing is completed. (11) Warranty period: one year (day/month/year)
(12) Others: /
2. If the quotation of the supplier participating in the bid (negotiation, inquiry) exceeds the budget amount of the package purchase, the bid (quotation) of the package is invalid.
3. Relevant provisions for multi-package bidding (negotiations, quotations):.
4. Suppliers who need to inquire about technical requirements can send your contact information to the contact request, and can also go directly to our office to check the tender (negotiation, inquiry) documents. /
Second, the qualification requirements of suppliers (a) suppliers must comply with the conditions of Article 22 of the "Government Procurement Law";
(b) Specific qualification requirements for each package:
1. Must be an independent legal person registered in the People's Republic of China to obtain a business license, and the registered capital is not less than 10 million yuan;
2. The bidder must provide the authorization of the equipment manufacturer or distributor for the project (if the manufacturer must provide the product production license);
3, the measurement of the product must be measured with a measurement certificate (manufactured by the country manufacturing standards and related certification) or the People's Republic of China measurement instruments type approval and the national 3C certification;
4, must provide bank credit or 2012 financial audit report;
5, must have similar performance in the past two years, and issued similar performance certification materials (contract or bid notice);
6, with strong after-sales service capabilities, with a full-time local service agency in Wuhan;
7. Good reputation, no bad records in bidding activities and business activities;
8. The bidder shall abide by relevant national laws, ordinances, ordinances and relevant systems of bidding and tendering. Once you participate in the bidding, you should bear the relevant legal responsibility.
(3) If the requirements of market access are required by national laws and regulations, the relevant provisions shall also be complied with.
The above qualification requirements are the basic conditions that this project supplier should have. Suppliers participating in each package of bids (negotiation, inquiry) must meet all the terms of the corresponding packages in the qualification requirements, and submit qualification certificates in accordance with relevant regulations.
Third, the tender (negotiation, inquiry) documents to obtain:
(I) Time of acquisition: From August 21, 2013 to September 10, 2013 (Beijing time: 8:30am to 12:00am, 2:30pm to 5:30pm, except statutory holidays) .
(2) Location: Wuhan Jitong Engineering Bidding Agency Co., Ltd. (No. 1 Lan Ling Road, Wuhan City, Room 301, 3rd Floor, Zhongnan Electromechanical Building).
(3) Acquisition requirements: Eligible suppliers shall, within the acquisition time, carry the procurement documents with their qualification certificates.
1. If the legal representative himself receives the certificate, he should obtain the original identity card of the legal representative and the original identity card of the legal representative.
(2) If the legal representative entrusts someone to collect, it will be obtained on the basis of the original letter of authorization of the legal representative and the identity card of the trustee.
3. At the same time, bring all the original materials and the official stamped copies of the contents of the “second supplier qualification†in this announcement.
4. Bidding (Negotiation Response, Quotation) Document Delivery Location and Deadline (1) Delivery Location: No. 10 Bid Opening Room, 4th Floor, Citizens' Home (Wuhan Municipal Service Center) (No. 117 Jinqiao Avenue, Jiang'an District, in Sanhuan South Road and Jinqiao Avenue intersection)
(2) Deadline: 9:30 on September 11, 2013 (Beijing time)
V. Bid opening (negotiation, inquiry) Venue and time (1) Venue: Opening Hall on the 4th floor of the People's Home (Wuhan Municipal Service Center) (No. 117, Jinqiao Avenue, Jiang'an District, at the intersection of Sanhuan South Road and Jinqiao Avenue)
(II) Time: 9:30 on September 11, 2013 (Beijing time)
At that time, delegates attending the bidding are invited to attend the opening ceremony.
6. Announcement deadline The announcement period for this announcement is 20 days.
VII. Contacts Contact information of the purchaser:
Name: Wuhan Environmental Monitoring Center Address: No. 422, Xinhua Road, Jianghan District, Wuhan Contact: Liu Zhiming Centralized Purchasing Agency or Government Procurement Agency Contact:
Name: Wuhan Jitong Engineering Bidding Agency Co., Ltd. Address: No. 1, Lan Ling Road, Wuhan City (Room 301, 3/F, Zhongnan Electromechanical Building)
Contact person: Zhao Xueli, Ke Mengna VIII, Government procurement supervision and management department Complaints Telephone and Telephone IX. Information release media (I) Hubei Wuhan government procurement network (2)
Wuhan Jitong Engineering Bidding Agency Co., Ltd. August 21, 2013
The impeller of the water pump is made of cast iron, and the blades on the impeller play a major role. The shape and size of the impeller of the water pump are closely related to the performance of the water pump. Generally, the impeller of the water pump can be divided into two types: single-suction impeller and double-suction impeller. Most of these types of double-suction impellers are double-suction impellers with both sides absorbing water and large flow. The impeller is the core component of the water pump and the main factor affecting the working efficiency. Under certain working conditions, if the impeller is not well designed, hydraulic loss and clearance loss will occur at the pump inlet and blade. So, we must choose a professional pump impeller manufacturer in terms of selection.
Water Pump Impeller,Stainless Steel Compressor,Precision Casting Water Pump Impeller,Stainless Steel Water Pump Impeller
Baizhu Network Technology Co., Ltd. , https://www.baizhucasting.com