Waterproof Metal Detector Door Metal Detector Gate Mcd-200

Digital Display Walkthrough Metal Detector (MCD-200

6 zones walk through metal detector

Functions and characters:

1. The whole product is consisted of two parts:

Left-right detecting gate + Mainframe

Body Scanner Walkthrough Metal Detector MCD-200

Features:

1. Six interlaced detection regions of the same high with the body and combining,

2. LED alarm light on column, displaying the area of metal detected accurately

3. Four pairs of infrared emission and the receiver to prevent detection blind spot

4.100% Ferrous & non-ferrous metal detect

5. with aluminum alloy binding tape, up to 99% non-condensing

6. Using microprocessor digital control technology, anti-interference ability,

7. Each region has 100 adjustable sensitivity, in accordance with the requirements in the 0-99 arbitrary regulation, and gets rid of the interference of belt, zippers and other objects.

8. Pass-through number and the alarm frequency can be counted automatically

9. Can be used independently, or several detection doors net work (minimum spacing of up to 40CM)to meet the flow requirements of pass through

10. Password protection function: To prevent non-authorized personnel to amend the parameters.

11. Assembled structure: Easy installation. User-friendly diagnostics identify fault condition,

12. Standard: "GB 15210-1994. Through-type metal detector door general technical conditions" national standards Basic safety: Meeting the requirements of GB4793. And program to be store in non-volatile memory; Comply with IP20(60529); Personal safety: Satisfied NILECJ-0601.

13. EMC electromagnetic radiation in line with the standards: Comply EN60950, no harm to the wearers of heart pacemakers, pregnant women, film and magnetic recording materials.

Specification:

1. Power supply: AC220V/50Hz or AC110V/60Hz

2. Back up battery: 4hours or 8 hours according requirement

3. Power consumption: Less 35W

4. Operation temperature: -20 ° C to 55 ° C

5. Weight: About 80kg

6. Through rate: More than 60 persons / per minute.

7. Tunnel size: 2010*700*560mm

8. Dimension: 2230*810*560mm

9. Package size: 2280*665**220mm(Main body)

780*480*290mm(Host processor)


  Digital Display Walkthrough Metal Detector (MCD-200

6 zones walk through metal detector

Functions and characters:

1. The whole product is consisted of two parts:

Left-right detecting gate + Mainframe

Body Scanner Walkthrough Metal Detector MCD-200

Features:

1. Six interlaced detection regions of the same high with the body and combining,

2. LED alarm light on column, displaying the area of metal detected accurately

3. Four pairs of infrared emission and the receiver to prevent detection blind spot

4.100% Ferrous & non-ferrous metal detect

5. with aluminum alloy binding tape, up to 99% non-condensing

6. Using microprocessor digital control technology, anti-interference ability,

7. Each region has 100 adjustable sensitivity, in accordance with the requirements in the 0-99 arbitrary regulation, and gets rid of the interference of belt, zippers and other objects.

8. Pass-through number and the alarm frequency can be counted automatically

9. Can be used independently, or several detection doors net work (minimum spacing of up to 40CM)to meet the flow requirements of pass through

10. Password protection function: To prevent non-authorized personnel to amend the parameters.

11. Assembled structure: Easy installation. User-friendly diagnostics identify fault condition,

12. Standard: "GB 15210-1994. Through-type metal detector door general technical conditions" national standards Basic safety: Meeting the requirements of GB4793. And program to be store in non-volatile memory; Comply with IP20(60529); Personal safety: Satisfied NILECJ-0601.

13. EMC electromagnetic radiation in line with the standards: Comply EN60950, no harm to the wearers of heart pacemakers, pregnant women, film and magnetic recording materials.

Specification:

1. Power supply: AC220V/50Hz or AC110V/60Hz

2. Back up battery: 4hours or 8 hours according requirement

3. Power consumption: Less 35W

4. Operation temperature: -20 ° C to 55 ° C

5. Weight: About 80kg

6. Through rate: More than 60 persons / per minute.

7. Tunnel size: 2010*700*560mm

8. Dimension: 2230*810*560mm

9. Package size: 2280*665**220mm(Main body)

780*480*290mm(Host processor)


 

Tape Edge Machine

Automatic mattress tape edge machine is mainly used for mattress tape sewing. The main advance is
sewing head need not moving, but the lifting machine can turn angles to sew mattress
of different thickness. It is equipped with Singer-300U chain sewing head and
microcomputer controlling system imported from America. When producing, the
conveyer can move forward, backward, turning 90 degrees or 180 degrees to sew the
whole mattress automatically.

Semi automatic mattress tape edge machine its working table is adopted high-strength independent bearing, stable
working condition, motor upper and down the height of worktable. The rotary power supply
is assembled in the machine. It is equipped with Singer-300U chain sewing head and
microcomputer controlling system imported from America. It may change walking carriage`s
turning speed automatically, which make mattress sewing operation more convenient, fast
and the finished turn-flange more beautiful.

Tape Edge Machine,Mattress Tape Edge Machine,Mattress Tape Edge Sewing Machine,Automatic Mattress Tape Edge Machine

SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.machinesoftlifefoam.com