ã€temperature】
A coat of clothes hanging in the closet is so empty, as if the soul has been found. Who knows, when my clothes stay, my heart is already gone.
Wooden furniture is sensitive to temperature, and the change in temperature, coupled with the inherent thermal expansion and contraction characteristics of wood, can easily deform the wardrobe panels. The summer heat brings a more severe test to the closet. What can we do to avoid the damage to the closet by the temperature?
Xiaobian suggestions:
1. Place the closet away from sources of heat (for example, air conditioner vents, heaters, etc.), or place the wardrobe in direct sunlight;
2, try to choose the better quality wardrobe veneer, good quality wardrobe veneer can withstand the impact of temperature changes, not easy to blistering.
ã€humidity】
The beautiful clothes are only temporary disguise, and the closet is only the last habitat. Soon it will take off with the wings of the gauze, flutter with the soul of the clothes, and fly to the desert.
In the summer when the rain is relatively abundant, the typhoon brought a steady stream of water vapor to the south and the air humidity reached a relatively high level. The long-term dampness of the panel wardrobe will cause the expansion and deformation of the seam joint due to the increase of the moisture content. In severe cases, it may also lead to cracking of the panel. Therefore, we must reduce the harm caused by the air humidity to the wardrobe.
Xiaobian suggestions:
1, from the source to solve, wardrobe close to avoid placing near wet areas (such as toilets, near the bathroom), but also to avoid the container filled with water next to the wardrobe in order to avoid spilling wet wardrobe;
2, in the weather with high humidity, you can use some desiccant in the closet. At the same time, lime and dehumidifier can be used to reduce the indoor air humidity;
3. Select the veneer with smaller water absorption. If it is a wood veneer, you can choose ash and teak, the shrinkage rate is small, and the maple tree's water absorption rate is large, so you need to choose carefully;
4. Protect the edge of the wardrobe plate and avoid touching the water or other solvents, otherwise it is prone to edge peeling. Edge sealing is very important for the dampproof of the wardrobe plate, which can isolate the contact between the moisture in the air and the wardrobe plate;
5. If an unfortunate closet is flooded, emergency measures should be taken at this time. Should immediately use a dry towel to suck the water away, and then use absorbent cotton or absorbent paper to dry the rest of the water, you can also use a hair dryer to dry, but should not be too close to the hair mouth to avoid damage to the wardrobe finishes.
ã€Stains】
Relying on the wardrobe when writing, move away from the space of a square foot and create another imaginary space on the paper.
The use of a closet for a long time will leave more stains. Parents of parents are even more troubled by this problem. Isn't the stain on the wardrobe destined to be branded by the years gear and witness the child's growth? That's not possible! Think of ways to get rid of stains on your wardrobe!
Surface cleaning
Dust: Pay attention to the daily cleanliness of the surface. When there is dust, use a dusting cloth or a soft cloth to remove dust. Also, avoid the dirt from coming into contact with the wardrobe.
Water mark: usually disappears after a period of time. If it has not faded after a long time, you can use a clean cotton cloth coated with a small amount of salad oil to wipe along the direction of the grain.
Food stains: A variety of tea stains, fruit juices, butter, etc. will leave a slight stain on the surface, should be wiped off immediately, and then use a clean soft cloth to polish the stains.
Ink traces: Wipe with a soft eraser. To prevent discoloration, apply a few drops of clear water to the stain. The cleaned surface can be maintained with a professional care agent or emollient oil.
Other general stains: Use professional wardrobe cleaners for cleaning. For stains on leather wardrobes, use a clean flannelette to remove some egg whites.
Corrugated sheet metal is produced by stretching a sheet of metal and then rolling it through a rolling die to create a linear, wavy pattern of crests and troughs; they are laid next to each other and are mainly used in outbuildings, barns, industrial warehouses, agricultural applications And waterproof roofs for commercial buildings, where aesthetics are less important, but waterproofing is important. In recent years, corrugated roof panels have been used as cladding in bars and clubs to add an industrial or gritty urban feel.
This form of corrugated profile metal sheet or sheet is also commonly referred to in the building industry as roof cladding; they are usually installed with a half-corrugated overlap to make it waterproof, our corrugated steel roofing sheets are galvanized to increase the protection and corrosion resistance.
The benefits of using corrugated steel sheets in your projects;
- highly robust
- light weight
- Weather and corrosion resistant
- excellent quality of protection
- easy to install
Corrugated steel roof sheets are galvanized to provide a highly corrosion-resistant surface, so no further painting or other surface treatments are required to improve the for extra protection. However, for aesthetic purposes, galvanized products can be painted or powder coated if desired.
Zinc Coated Steel Sheet,Corrugated Steel Sheet,Zinc Coated Roof Sheet,Corrugated Sheet
Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com