There are many safety hazards in cars during this hot season, such as high-temperature tire bursts, auto-ignition, and so on. It is impossible to prevent them from happening. The most important thing to deal with these potential threats is to maintain the car in time. How to give the car maintenance in the summer? Now we introduce to you a few common summer car maintenance tips.
First, choose a high viscosity oil
In the summer, we should try to choose some oils with higher viscosity because the viscosity of the oil will change with the increase of temperature. When the temperature is high, the viscosity of the oil decreases, the oxidation resistance deteriorates, and the oil deteriorates easily. The oil film formed inside the engine is thin and non-uniform, which easily leads to failure.
Second, air conditioning sterilization and deodorization is necessary
After a long period of vacation, automotive air conditioners are prone to fungal and mold growth. It not only affects the air quality in the car, but also harms the health of the people in the car. Therefore, the air conditioning system must be sterilized and deodorized before summer. In addition, the use of car air conditioning in the summer is also a little trick, such as: Do not adjust the temperature too low; each time the use of air conditioning should not be too long; to develop a parking first turn off the air conditioning and then turn off the habit, and so on.
Third, high temperature explosion-proof tire
The higher the temperature is, the higher the air pressure in the tire, the hotter summer weather, the tire pressure that is too high or too low can easily cause the tire to swell when the abnormal heat rises. Therefore, special attention should be paid to checking the tire pressure in the summer to keep it in the normal range. At the same time, due to the increase of rainwater in summer, to eliminate the impact of wet road surface on traffic safety, it is necessary to check the tread pattern, including the pattern type and pattern depth of the tire. In general, the manufacturer will put a wear mark on the tire. When the pattern wears out to reveal this mark, it means that we need to replace the tire.
Fourth, to prevent auto-ignition
The auto-ignition of the car will not only cause economic losses, but it may also cause casualties, requiring more attention. Causes of auto-ignition are many reasons, such as engine fuel filter failure, line failure, power line aging.
pocket filter material
Material and Quality:
Pocket filter material is ultrasonic welded with synthetic fabric, melt-blowm fabric, compound media,etc. Instead ofusing the old-fashioned production process, now we adopt multi-layer filter media to reach multistage filtration, guide the wind through bag filter in a very uniform way and make lower resistance, longer service life, practical and well-looking pocket filter material.
Performance:
· Eco-friendly and environmental protection
· Excellent welding & sealing to avoid any air leakage
· Multi-layer ascending structure to ensure longer service
life
· Low resistance, high efficiency,all standard color to
recognize different grade easily
Application:
Widely used in bag filters.
Pocket Air Filter Material,Pocket Air Filter Material,Meltblown Pocket Filter Material,HVAC Pocket Filter Media
Shenzhen China Textile Filters , https://www.ctfiltech.com