Steam Hot Water Brass Stainless Steel Solenoid Valve -- High Temperature (SLG SERIES)

• Model NO.: SLG SERIES
• Connection Form: Thread
• Material: Stainless Steel
• Valve Structure: Direct Action Diaphragm Structure
• Usage: Flow Control
• Slg Series: 1/8′′~1′′
• Transport Package: Export Carton
• Origin: Yuyao, Zhejiang, China

• Actuator: Electric
• Type: Pilot Operated
• Pressure: High Pressure
• Power Supply: AC & DC Solenoid Valve
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Trademark: SANLIXIN
• Specification: ISO & TUVE & CE
• HS Code: 8481804090

Solenoid Valve -- High Temperature (SLG SERIES)

Contact Person
Jessica     TEL: 0086-574-62636060      MOBILE: 0086-13777166585
Vivian         TEL: 0086-574-62640822     MOBILE: 0086-13967833354
Devin        TEL: 0086-574-62559181      MOBILE: 0086-15888035074

PRODUCTS
SLG High Pressure Series. 2/2-way Solenoid Valve. Normally Closed
Body Material: Forged Brass Stainless Steel
Pressure: 0~100kgf/cm
Pipe Connection: 1/8"~1"
Fluid Media: Water\Hot Water\Air\Gas\Light Oil etc.






Yuyao Sanlixin Solenoid Valve Co., Ltd specializes in designing and manufacturing all kinds of fluid solenoid valves.
Our solenoid valve have direct acting type, pilot operated type, piston types
The body can be made of brass, stainless steel, plastic, Teflon and aluminum and the seals can be made of NBR, EPDM, viton, Teflon, PTFE silicon
The valve size can be DN1.00mm to DN150mm; Media can be water, hot water, gas, air, steam. Light oil, weak acid& alkali fluids etc.
So our solenoid valves are suitable for all the general purpose equipment.

Vertical Machining Center

A 3-Axis CNC Machining Center/Mill is used for creating various industrial parts. This is achieved by using a wide-range of tooling and cutters depending on the type of material being cut and the end product being manufactured.
A 3-axis CNC Mill works on three separate axes:
X-Axis: Moving longitudinally or [left-to-right"
Y-Axis: Moving laterally or [front-to-back"
Z-Axis: Moving Vertically or [up-and-down"
CNC Vertical Machining Centers can include an additional axis to do specific cutting applications.
Rotary Tables are common as a 4th Axis on mills. They can vary in size and weight capacities and can have a horizontal or vertical configuration. They are generally an add-on to a standard 3-axis mill. The mill will have to have a proper 4th axis interface (generally a 4th axis card, drive and CNC Control) to accept a 4th axis rotary table.
Trunnion Tables can also be an add-on to a vertical CNC Mill. A Trunnion table adds a 4th and 5th axis to a standard mill by incorporating an A-Axis (which rotates around the X-Axis) as well as a C-Axis (which rotates around the Z Axis).
A true 5-axis machine can allow for continuous 5-axis machining simultaneously. This increases both speed and accuracy when machining the part.
CNC Vertical Mills generally have a single spindle, automatic tool changer, work table and CNC Control.
The spindle on a CNC Machining Center can have a wide range of speeds depending on what material is being cut and the depth of cut that is required. Typical spindle speed ranges from 0 to 10,000 RPM. Higher speeds are used for lighter materials including graphite and aluminum among others. Higher speeds can reach 12,000 RPM up to 50,000 RPM and higher.
The Spindle is loaded with tool holders and cutters to achieve the proper material removal. There are many different styles of tool holders including BT and CAT – which have a conical shape as well as HSK, which uses flanges instead of a taper to lock the holder in place. BT and CAT Holders can come in various sizes including 30, 40 and 50 taper depending on the size of tool the cutter requires. HSK (Hollow taper ShanK) comes in a variety of types – A through F – and sizes from HSK-32 up to HSK-160. HSK is considered a better tool holder for high speed machining as there is more surface contact between the spindle and the holder, reducing vibration and keeping the tool from pulling back into the receiver when cutting at high speeds.
A CNC Vertical Machining Center offers different styles of automatic tool changers as well. The most common style is the umbrella-style. This is where the tool holders are loaded into the carousel vertically. The other style is a drum or side-mount style. The tools are loaded in horizontally in this type. This allows for greater part height in the work area and can help accommodate a rotary table, fixture or any additional work holding devices mounted to the table.

Vertical Machining Center,Vertical Cnc Machine,Cnc Vertical Machining Center,Vertical Turning Center

Jiangsu Hoston Machine Tools Co., Ltd. , https://www.haostonmachinetools.com