FX-4400 (Single-needle)
FX-4420 (Double-needle)
FX-4401 (No backstitch)
FX-4400L (Left hook)
FX-4400D (Single-needle and thread trimmer with reverse sewing)
FX-4420D (Double-needles and thread trimmer with reverse sewing)
Features: Compound Feed Heavy Duty Lockstitch Sewing Machine is the latest of FOXSEW brand heavy duty sewing machines, which is designed with large vertical rotating hooks for thread loop catching and sliding bars for thread up-taking. It has been sub-classed into single needle, two needles, single needle with under-trimmer and two needles with under-trimmer. The application of needle bearings for arm shaft and hook shaft, dog belt driving, plunger pump lubrication and compound feed by needle bar, presser foot and feed dog provides this series with such splendid features as smooth running, quiet working and a long service life. It is also equipped with a safety clutch to prevent the hooks from damage by over-duty operation. So it is especially available in stitching sofa, Suitcase, car seat cushions, car upholstery, safety belts, safety air bags, handbags, Luggage case, tents, parachutes, etc...
| Model | FX-4400 |
| Max. Sewing Speed | 2000 r.p.m |
| Stitch Length | 0-9 mm |
| Needle Bar Stroke | 36 mm |
| Thread Take-up lever stroke | 74.5 mm |
| Presser foot lift | By Hand: 8mm By Knee: 16 mm |
| Needle Size | DPX17 18#-23# |
| Rotating Hook | Automatic Lubricated Large Rotary Hook |
| Lubrication | Automatic Lubricated |
| Safety Clutch device | Yes |
| Needle Gauge | Standard: 6.4mm, 3.2, 4.8, 9.5, 12.7 mm is available. |
| Motor | 400W 1400 r.p.m and 550W Servo Motor  |
Product Description
GMP Drying Oven / Medicine Powder Drying Oven adopts noise elimination and thermal stable axial flow fan and automatic temperature control system. The entire circulation system is enclosed to make that the heat efficiency of the drying oven increases from 3~7% of the traditional drying oven to 35~45% of the present one. The highest heat efficiency can be up to 50%. The successful design of CT -C Hot Air Circulation Oven makes that the Hot Air Circulation Drying Oven in our country reach the advanced level in the world. It saves energy and increases the economic benefit.
Main Features
1. The heat source can be steam, electricity, far infrared, or steam+electricity. Customer can select one of the heating ways in accordance with practical conditions; 2.The temperature of operation: 50 ~ 140 °C for steam, Maximum temperature will be 150 °C; 3.50 ~ 350 °C for electricity or far infrared; 4. There are automatic and computer control systems for customer selection; 5. The normal pressure of steam will be 0.02-0.8MPa (0.2-8kg/cm 2); 6. The equipped power of electric heater will be 15kw Calculated with Model I and the operational power to be used will be 5-8kw/hr; 7. for special requirement, please indicate it in order; 8. The price of non-standard oven shall be discussed additionally; 9. If the operation temperature is more than 140 °C or less than 60 °C, please indicate it in order; 10. The size of drying trolley and tray is standardized. They can be exchanged each other; 11 The size of drying tray: 460 ×640×45(mm).
Characteristics
Most hot air is circulated in the oven. The Heat efficiency is high and the energy is saved. By using the forced ventilation function, there are adjustable air distribution plates inside the oven. The materials can be dried uniformly. The heating source might be steam, hot water, electricity and far infrared. With a widely selection. The whole machine is low in the noise. The operation is in balance. The temperature is controlled automatically. The installation and maintenance are easy. The application is wide. The machine can be used for drying various materials and is general drying equipment.
GMP Medicine Drying Oven, GMP Drying Medicine Oven, GMP Pharmaceutical Drying Oven, Drying Oven
Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com