Shrink machine common troubleshooting methods

The shrinking machine uses shrink film wrapped around the outside of the product or package. After heating, the shrinking film shrinks and wraps tightly around the product or package, fully displaying the appearance of the product, increasing product salesability, and increasing the beauty and value.

After being wrapped by a heat shrinkable machine, the packaged articles can be sealed, moisture-proof, and anti-pollution, and the goods can be protected from external shocks and have a certain cushioning property, especially when the fragile goods are packaged, which can prevent the containers from scattering when broken. In addition, the possibility of product being dismantled or stolen can be reduced.

PE shrinkage machine common faults and exclusion

1. No heat in the contraction chamber

a. Bad connection of heating switch, switch

b. Aging of indoor wires is short circuited and wires are exchanged

c. The head of the electric heat pipe is not solid or the electric heat pipe is damaged

d. Damage to the temperature control panel, exchange

e, bad potentiometer, exchange

2. The transmission network does not turn

a. Transmission switch failure, exchange

b. Adjust the control board bad, replace

c. potentiometer bad, exchange

d. Transmission motor damage, exchange

e. Shrinkage machine transport mechanism stuck, troubleshooting after inspection