Rotary solid-liquid separator structure and use

Rotary solid-liquid separator is a structural form of bilateral chain drive and self-cleaning plow-shaped rake cleaning. The solid-liquid separation equipment adopts a sullying mechanism that is installed in a slanted manner and is hauled by a circulating chain to perform decontamination. The rotary solid-liquid separator can contaminate the entire depth of the channel.

The wall plates on the sides of the frame of the rotary solid-liquid separator are made of stainless steel plates with a sufficient thickness. A sufficient number of channel steel bars are arranged between the two wall plates at a certain distance and welded to form a rigid overall frame. It is sufficient. The strength and rigidity can ensure that it will not be distorted when there is a water level difference between the front and the back of the grid and during transportation and installation.

The frame and frame shroud of the rotary solid-liquid separator are bolted with stainless steel of considerable dimensions to form a rigid support structure. The frame and shield are continuously welded to prevent sewage from leaking out. The structure of the shield is convenient for maintenance inspection and can meet the requirements of outdoor installation.

The main driveshaft of the rotary solid-liquid separator has sufficient strength and rigidity to withstand the simultaneous load of bending moment and torque.

The rotary solid-liquid separator adopts a structure type in which the plough-shaped tooth rake and the traction chain are connected into one body, and is driven by a speed reducer and driven by a traction chain to rotate the plow-shaped gear rake grid surface at a certain linear velocity in the direction of the reverse flow. Movement, because the lower part is submerged in the channel sewage, the water in the water is captured by the plough-shaped gingivae and carries the dirt out of the liquid. The liquid flows through the gap between the plough-shaped gingivae.

Rotary solid-liquid separator can ensure that the slag collection and slag discharge is in the best condition. The height of its discharge port is consistent with the height of the conveyor, and when the plough-shaped rake collects dirt to the discharge port, Due to the effect of the steering guide and the guide wheel, most of the dirt will drop by gravity and drop it. A few of the dirt that cannot fall due to gravity will remove the dirt stuck on the gum by the action of the slag removing mechanism.

The rotary solid-liquid separator is provided with a guiding device for changing the operating direction of the plough-shaped gear, which is made of stainless steel and consists of 4 guide wheels, which are respectively placed on the top and bottom of the rack. The distance between the bottom guide wheel and the bottom of the tank is designed to be the smallest, which enlarges the working range of the gingiva. The sewage in the canal flows through the grille, and there is no dead zone on the two sides of the canal. The grille facilitates the decontamination at the entire height and ensures the bottom. Do not collect garbage.

The rotary solid-liquid separator is provided with a slag removing brush at an appropriate position on its discharge port, which can easily scrape the dirt on the rake teeth to the hopper and to the feed hopper of the press. Such reciprocating movement guarantees. Every time dirt from the caries is scraped clean.