BHM services:
1.We provide mould, OEM is available "according to the customers' drawings (material can be done according to customer's requirement).
2.We improve the finished product, customers can also according to the mold production of finished products.
3.We provide one-stop service, from design, production, service, etc.
4.If you have any request can contact us.
Â
BHM can provide you with high quality mould at the best price as well as we can keep delivery date. Our main business is for mold tooling for exporting business. Rich experience in doing the best quality moulds for you.
For moldmaking service, we offer:
1. HASCO or DME Standard
2. Multi-cavity Mould, Hot Runner Moulding, Gas-assisted molding, Double-colored moulding.
3. Tooling Lead Time is as Short as Possible
4. Best Quality at a Reasonable Price
5. One contact person during the whole project, let you know your item at any time.
6. Weekly report with photos of project status
We are looking forward to your reply!
 What we offer | 1, Design both for products and mould 2, Tooling and molding 3, Printing, Packaging, Assembly |
 What we promise |  On time delivery, quality products and high efficiency work |
High Efficiency Spirotal Heat Exchanger
The equipment is made of two rolls forming spiral channels.Two kinds of heat transfer media can flow in full countercurrent, which greatly enhances the heat transfer effect, Even small temperature difference can achieve ideal heat transfer.
The nozzle of tangential structure with Low resistance, Due to helical channel are average curvature, There is no big liquid flow, Therefore, the design flow rate can be increased so it has high heat transfer capacity.
Type I Non detachableSpiral plateHeat exchanger`s helical channel are welded and sealed, so it has high sealing performance.
Type II detachableSpiral plateHeat exchanger`s Structure principle similar to above,But one of the channel can be disassembled and cleaned, especially for heat exchange with viscous and precipitated liquid.
Type III detachableSpiral plateHeat exchanger`s Structure principle similar to above,But two channels can be disassembled and cleaned,ranges aremore extensive.
The nominal pressure PN of spiral plate heat exchanger is 0.6, 1, 1.6 and 2.5MPa (refers to the maximum working pressure of single channel) , material can be divided into carbon steel and stainless steel.Customers can choose according to the actual process
When a single device cannot meet the requirements, multiple devices can be used in combination, but the combination must conform to the following provisions: parallel combination, series combination, equipment and channel spacing is the same. Hybrid combination: one channel in parallel, one channel in series
High Temperature Spiral Plate Heat Exchanger,Spirotal Heat Exchanger Equipment,Spiral Board Plate Heat Exchanger,Carbon Steel Spiral Plate Heat Exchanger
Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com