With the development of science and technology, the application area of ​​pumping solid substances is expanding, such as sewage sludge, mud pulp, ash residue, grain starch, beet fruit, shellfish and so on. There are two main requirements for pumps that deliver these substances: First, there is no blockage and second, wear resistance. The main wear-resistant and material-related, non-clogging depends mainly on the structure of the impeller.

At present, as the main structure of non-clogging pump impeller:

1. Open or semi-open impeller;

2. Swirling impeller;

3. Single (double) flow impeller;

4. Spiral centrifugal impeller.

These non-clogging impeller has its own characteristics, for different occasions, as follows:

Open or semi-open impellers - such as increased wear gap, decreased pump performance, and no clogging performance, can not transport large particles, long fiber material;

Swirling impeller - no clogging performance, good wear resistance, suitable for conveying large particles, but no damage, the destruction of the transport material, can transport gas containing liquids, not suitable for conveying liquid containing long fiber material;

Single-flow impeller - good non-destructive conveying material, no blockage performance, suitable for conveying large particles of long fiber material, and good wear resistance, but the balance of high demand, poor balance operation;

Dual-flow impeller - passing capacity slightly worse than a single runner, but because of symmetrical runner, good balance performance, stable operation, suitable for high-lift, high-flow pump;

Spiral centrifugal impeller - good non-blocking, suitable for containing liquid particles and fiber materials, the destructive transport of small, good non-destructive, but the higher the balance.

Vacuum Forming Large Parts

Yiyongli is a leading supplier of custom plastic large part by vacuum forming process across a variety of industries.We can provide product design and manufacturing engineering assistance and is ISO 9001:2015 registered.


Vacuum forming is a very economical method for producing large plastic parts.It offers lower cost tooling and quicker prototyping than other technology. Vacuum forming is best choice compared to other manufacturing methods such as complex fabricated sheet metal or fiberglass, in large, complex shapes which require a lot of metal fabrication, grinding and finishing. Vacuum forming also compares favorably to injection mould in big plastic parts when small quantities.


Vacuum forming large parts are single component parts that come out of the actual product or a substantial part of the finished product. Usually they are enclosures or housings for equipment.Applications of vacuum forming large parts are seen in many industries, including medical equipment panels ,machine enclosures, engine covers for aerospace, transportation or construction industries, and rail-car interior trim or seat components.

Vacuum Forming Large Parts,Vacuum Forming Plastic Products,Vacuum Forming Plastic Parts,Thermforming Large Parts,Thermoforming Plastic Parts

Dongguan Yiyongli Industrial Co.,Ltd. , https://www.absthermoforming.com