Model NO.: HT-0380
Measurement Range: Water(20oc):6-200000L/H
Ratio of Range: 10:1 for Standard, 20:1 for Special
Media Temperature: Standard: -80oc~140oc
Temperature of Operation Environment: H1:-40oc~100oc, H2:-80oc~250oc
Connection Pattern: Standard Flange
Cable Interface: M20*1.5, Pg11, 1/2 NPT
Power Supply: Standard:24VDC (10.8VDC-36VDC)
Output Signa: Standard: Two Wires System4~20mA
Protection Level: IP65
Trademark: HANTON
Transport Package: Standard Exporting Packing
Origin: Prc
HS Code: 9026100000
Metal tube rotameter is a kind of flowmeter which is suitable for measuring flow of liquid and gas through floater movement inside metal tube. Data of flow can be read from dial scale thanks to magnetic coupling to act on signal transmitter. Output of electrical signal is 4-20mA.
The rotameter can be used in any harsh working environment due to its shatter-proof, pressureproof, temperature-resistant and corrosion-resistant characteristics.

1. Features of the product
1. Double lines LCD, showing both instantaneous and accumulated flow.
2. More stable signal output: Construction of single axis and non-touching magnetic coupling.
3. Fully metal-made body, suitable for high temperature, high pressure and corrosive media.
4. Can be used even in flammable, explosive and harsh working environments.
5. Power supply: Two-wire system, battery and AC for selection
6. With functions of data recovery, backup and power failure protection
7. New design for less pressure loss.


2. Technical data
Measure range Water (20ºC) 6L to 200000L/h,
Air (0.1013MPa 20ºC) 0.05m3 to 4000m3/h
Ratio of measuring range 10:1 for standard,  20:1 for special 
Accuracy  1.5 for standard, 1.0 for special 
Temp of mediums  -80ºC to 120ºC for standard type, 400ºC for high temperature type, ≤85ºC for PTFE lining type 
 
Temp of working environment
 
-40ºC to 120ºC 
Viscosity of mediums DN15: η≤5mPa.s(F15.0-F15.4) η≤30mPa.s(F15.5-F15.9) 
DN25:η≤250mPa.s DN50-DN150:η≤300mPa.s
 
LCD display  LCD display with backlight can show instantaneous flow, accumulated flow (positive, negative and net), velocity, working status and etc. 

Goodsense Cushion Tire LPG&Gasoline Forklift advantages:

- Shorter wheelbase with smaller turning radius with more flexibility.

- Cushion tire to work at smooth pavement, does not require too much pavement friction

- for indoor works with less noise and less emission in contrast with diesel forklift

- EPA tier 4 compliance

 

General

 

 

 

Model

 

FY20D1

Power Type

 

LPG

Load Capacity

kg

2000

Load centre

mm

500

Tyre

 

 

 

Tyre

 

 

Cushion Tyre

Front Tyre

 

21x7x15

Rear Tyre

 

16(1/4)x6x11(1/4)

Overall Dimension

 

 

 

Lift Height

mm

3000

Fork Size

L×W×T

mm

1070*120*40

Mast Tilt Angle

F/R

.

6/12

Mast Lowered Height

mm

2070

Mast Extended Height(with backrest)

mm

4070

Length to face of fork(Without fork)

mm

2360

Overall Width

mm

1110

Cabin Height

mm

2080

Loading Plane Height

mm

3000

 

 Cushion Tire Electric ForkliftCushion Tire Electric ForkliftCushion Tire Electric Forklift

 

Application Area:

1.Warehouse

2.Port

3.Factory

4.Distribution Center

5.Logistics

 

If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.

 

Cushion Tire LPG&Gasoline Forklift

Gasoline Forklift,Forklift With Quadruple Mast,Cushion Tire Lpg Forklift

ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.dieselforklift.nl