November 24th, 2011 CNC cutting machine and related technologies were introduced into the domestic market in the 1970s. After a short period of more than 10 years, domestic companies based on the digestion and absorption of relevant advanced CNC cutting technology. , Developed a number of domestic brands, and quickly occupied the domestic market of CNC cutting machine with the characteristics of economical application and stable quality.
Ten years ago, the word “CNC cutting machine†sounded like high technology. At that time, there was no regular CNC cutting machine manufacturer in China. It needed a CNC cutting machine equipment. It needed to be ordered from abroad, and the price was very noble. At that time, there was a CNC. The price of the cutting machine is about 1.6 million. Because the price is too high, many machinery manufacturers can only stop. Only the state-owned enterprises at that time have the ability to purchase such equipment. After all, the purchasing power was limited. At that time, the imported CNC cutting machine was only able to sell more than 40 units per year on average.
With the development of science and technology, domestic enterprises have begun to produce CNC cutting machines. This time is also the most difficult time for the development of CNC cutting machine, domestic production of CNC cutting machine is priced at more than 600,000, imported equipment is 1.6 million, the price difference is too large, leading our public manufacturers are afraid to try to buy, has been the end of 2004 China According to the Statistics of the Machinery Industry Association, there are more than 1,800 domestic companies that use our own R&D CNC cutting machines. After the survey speech went into the market, in early 2005, the major machinery manufacturers’ sales plans all contained CNC cutting machines. Since then, CNC cutting machines in China have slowly taken over the entire Chinese market. Imported cutting machines, which originally had a small share of the Chinese sales market, have been hindered by domestic cutting machines and sales have been hindered and eventually failed. Open China's sales portal.
In recent years, the rapid development of CNC cutting machine technology has brought good news to many domestic machining enterprises. Domestic CNC cutting machine is cheap, simple operation, full Chinese subtitles, maintenance is simple and clear CNC cutting machine is like the phone I usually play, like a few times to get familiar with the word CNC for everyone, it is not so strange .
Ten years ago, the word “CNC cutting machine†sounded like high technology. At that time, there was no regular CNC cutting machine manufacturer in China. It needed a CNC cutting machine equipment. It needed to be ordered from abroad, and the price was very noble. At that time, there was a CNC. The price of the cutting machine is about 1.6 million. Because the price is too high, many machinery manufacturers can only stop. Only the state-owned enterprises at that time have the ability to purchase such equipment. After all, the purchasing power was limited. At that time, the imported CNC cutting machine was only able to sell more than 40 units per year on average.
With the development of science and technology, domestic enterprises have begun to produce CNC cutting machines. This time is also the most difficult time for the development of CNC cutting machine, domestic production of CNC cutting machine is priced at more than 600,000, imported equipment is 1.6 million, the price difference is too large, leading our public manufacturers are afraid to try to buy, has been the end of 2004 China According to the Statistics of the Machinery Industry Association, there are more than 1,800 domestic companies that use our own R&D CNC cutting machines. After the survey speech went into the market, in early 2005, the major machinery manufacturers’ sales plans all contained CNC cutting machines. Since then, CNC cutting machines in China have slowly taken over the entire Chinese market. Imported cutting machines, which originally had a small share of the Chinese sales market, have been hindered by domestic cutting machines and sales have been hindered and eventually failed. Open China's sales portal.
In recent years, the rapid development of CNC cutting machine technology has brought good news to many domestic machining enterprises. Domestic CNC cutting machine is cheap, simple operation, full Chinese subtitles, maintenance is simple and clear CNC cutting machine is like the phone I usually play, like a few times to get familiar with the word CNC for everyone, it is not so strange .
V Belt Pulley,Timing Pulley,Transmission Part
Wangli Heavy Machinery Co.,Ltd. , http://www.hncasting.com